Small problem with Corsair H110i gtx.

[Romanko]

Hi, I have a small problem.
My pc is using water cooling unit Corsair H110i gtx. Everything is connected except one cable. My guess its some sort of cpufan dummy cable because i am getting error message everytime I start the pc. Something like cpu fan is not connected.
My question is : should i connected that one cable do the ground of cpu fan on mobo ?
Sorry for my bad english.
Thanks for any help.

 

[Tom Waller]

is it a 3pin fan connector or a USB?
You'll be able to plug these into your motherboard

 

[Romanko]

is it a 3pin fan connector or a USB?
You'll be able to plug these into your motherboard

The cpu fan on mobo has 4pins. The cable has 3 holes but only one has cable comming out of it.

 

[ubercake]

According to Corsair... Connect the fans to the pump. Connect the pump to the CPU fan header connector on the motherboard (the 3-pin connector from the pump to the 4-pin CPU connector on the motherboard is fine!). You should also have another cable that you use to connect the pump to an available USB header on the motherboard.

Optionally you can use a 3-pin to molex adapter and connect your pump directly to the a 4-pin molex connector on the PSU for a constant 12V, but then you'll have to turn off the alarm for the CPU fan in your BIOS if your motherboard allows for that.

 

[Romanko]

According to Corsair... Connect the fans to the pump. Connect the pump to the CPU fan header connector on the motherboard (the 3-pin connector from the pump to the 4-pin CPU connector on the motherboard is fine!). You should also have another cable that you use to connect the pump to an available USB header on the motherboard.

Optionally you can use a 3-pin to molex adapter and connect your pump directly to the a 4-pin molex connector on the PSU for a constant 12V, but then you'll have to turn off the alarm for the CPU fan in your BIOS if your motherboard allows for that.

well.... The cables that are comming out of the cooling unit are 1sata fot power that i connected to psu, then 2 connectors with three pins that i connected with 2 fans that i got with it and one cable with three holes but only one of the holes has cable. Should i connect that cable so that that pin with cable in connects with the ground pin for cpu fan on mobo or some other way around ? http:// i hope this picture explains my question

 

[Romanko]

so the error stopped when i connected the cable with cpu fan in pin