Been planning a briefcase PC build for a while, and I've finally got all the components. Was putting it altogether until I found that
1: The 4-pin on the 20+4 pin cable doesn't fit in the motherboard
2: There's no ATX_12V cable
Images of the cables and motherboard in question; View: https://imgur.com/a/UJnbiHa
I'm using an Aorus B450 I Pro WIFI ITX motherboard, with an FSP FSP220-50FGBBI(M) Flex PSU. The second cable from the PSU is weird, only having two SATA, a MOLEX, and some other thing. Am I able to just use adapter cables with these, or do I have to get a proper SFX/ATX power supply?
UPDATE: Apparently it should technically work with just a 20-pin in the ATX and a 4-pin in the ATX_12V, but I'm pretty concerned about blowing up the components so I'm just going to look for a new PSU. SFX PSUs aren't much bigger than the one I've got, apparently.
1: The 4-pin on the 20+4 pin cable doesn't fit in the motherboard
2: There's no ATX_12V cable
Images of the cables and motherboard in question; View: https://imgur.com/a/UJnbiHa
I'm using an Aorus B450 I Pro WIFI ITX motherboard, with an FSP FSP220-50FGBBI(M) Flex PSU. The second cable from the PSU is weird, only having two SATA, a MOLEX, and some other thing. Am I able to just use adapter cables with these, or do I have to get a proper SFX/ATX power supply?
UPDATE: Apparently it should technically work with just a 20-pin in the ATX and a 4-pin in the ATX_12V, but I'm pretty concerned about blowing up the components so I'm just going to look for a new PSU. SFX PSUs aren't much bigger than the one I've got, apparently.
Last edited: