Some Error from Speedfan

[StanicEnemy]

hi everyone i have 500gb harddisk when I run speedfan there is a error that says "ProbeSCSI: WARNING: hard disk skipped because of invalid returned LogSense data" should I ignore it or is it important thing? I ran some hdd test programs there were no errors.

 

[Boogieman_WD]

Hey StanicEnemy. As I see it, it says that the program can access SMART data and monitor the HDDs temperature, but I don't think it's that relevant to the HDD's health. You did well by testing the drive with an HDD specific diagnostic tool. If you're still worried I'd recommend that you download the manufacturer's diagnostic tool (if you've used a 3rd party tool before) and test the drive with it from now on if you have any suspicions that there might be something wrong with it.

Hope that helps.
Boogieman_WD

 

[StanicEnemy]

Hey StanicEnemy. As I see it, it says that the program can access SMART data and monitor the HDDs temperature, but I don't think it's that relevant to the HDD's health. You did well by testing the drive with an HDD specific diagnostic tool. If you're still worried I'd recommend that you download the manufacturer's diagnostic tool (if you've used a 3rd party tool before) and test the drive with it from now on if you have any suspicions that there might be something wrong with it.

Hope that helps.
Boogieman_WD

alright thank you.