Speedtouch 510 Modem & Linksys WRT54GX Router

[Guest]

Archived from groups: alt.comp.periphs.webcam (More info?)

Hi All,

I hope that someone can help me. I'm desperate at this time.
I can't get my Linksys WVC54G Camera over IP working. Does
someone kow how to do this.
If I use the internal network everything is OK. Whe I try to
reach the Camera through the Internet I can not approach it
......... Who ca help me with the settings.

Thanks,
Greetings,

Ron Mostaard

 

[Guest]

Archived from groups: alt.comp.periphs.webcam (More info?)

"Ron Mostaard" <flevoron@wxs.nl> wrote in message
news:4317f027$0$19743$ba620dc5@text.nova.planet.nl...
> Hi All,
>
> I hope that someone can help me. I'm desperate at this time. I can't get
> my Linksys WVC54G Camera over IP working. Does someone kow how to do this.
> If I use the internal network everything is OK. Whe I try to reach the
> Camera through the Internet I can not approach it ........ Who ca help me
> with the settings.
>
> Thanks,
> Greetings,
>
> Ron Mostaard

Ron, you will need to logon to the Speedtouch510 and setup a NAPT
Go to http://10.0.0.138 and login

Now select Advanced > NAPT and click on New
Leave Protocol as it (TCP)
Inside IP is the LAN IP of the webcam
Leave outside IP: 0.0.0.0
I'm not sure what your inside port is, but as you can access it, you will
know. Use that for the Inside and Outside port.
Click on Apply, and Save all (left top)

Good luck,

Noël

--
http://webcam.kijk.info
http://www.resize2mail.com

 

[Guest]

Archived from groups: alt.comp.periphs.webcam (More info?)

Hi Noël,

Those settings are already OK....
It still won't work ......

--
Ron Mostaard
Globeplein 30
Almere - Buiten
The Netherlands

Tel. +31 (0)36 53 72 901
Fax +31 (0)36 53 27 299
Cell +31 (0)6 54 623 137
"Noël®" <n03l@_no_place_like_home_hotmail.com> schreef in
bericht news:df9djh$av9$1@news.cistron.nl...
>
> "Ron Mostaard" <flevoron@wxs.nl> wrote in message
> news:4317f027$0$19743$ba620dc5@text.nova.planet.nl...
>> Hi All,
>>
>> I hope that someone can help me. I'm desperate at this
>> time. I can't get my Linksys WVC54G Camera over IP
>> working. Does someone kow how to do this.
>> If I use the internal network everything is OK. Whe I try
>> to reach the Camera through the Internet I can not
>> approach it ........ Who ca help me with the settings.
>>
>> Thanks,
>> Greetings,
>>
>> Ron Mostaard
>
> Ron, you will need to logon to the Speedtouch510 and setup
> a NAPT
> Go to http://10.0.0.138 and login
>
> Now select Advanced > NAPT and click on New
> Leave Protocol as it (TCP)
> Inside IP is the LAN IP of the webcam
> Leave outside IP: 0.0.0.0
> I'm not sure what your inside port is, but as you can
> access it, you will know. Use that for the Inside and
> Outside port.
> Click on Apply, and Save all (left top)
>
> Good luck,
>
> Noël
>
> --
> http://webcam.kijk.info
> http://www.resize2mail.com
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.webcam (More info?)

"Ron Mostaard" <flevoron@wxs.nl> wrote in message
news:4318a06d$0$23965$ba620dc5@text.nova.planet.nl...
> Hi Noël,
>
> Those settings are already OK....
> It still won't work ......
>

Hmm thas no good.. It should work (I think)

Are you maybe also behind an other router? (Internet <> Speedtouch510 <>
router <> webcam) If so, you will also need to set the correct port in the
router.

Also... To make sure that the port is open you should get a friend (outside
the network) to scan on the webcan port and see if it's open (I think it's
1024)
(I did do a scan on your IP, and got nothing back)

Noël

--
http://webcam.kijk.info
http://www.resize2mail.com

 

[Guest]

Archived from groups: alt.comp.periphs.webcam (More info?)

Said he has WRT54GX Router

He needs to pass real IP to it from the modem

Sounds like he needs the router in bridge mode.

"Noël®" <n03l@_no_place_like_home_hotmail.com> wrote in message
news:df9djh$av9$1@news.cistron.nl...
>
> "Ron Mostaard" <flevoron@wxs.nl> wrote in message
> news:4317f027$0$19743$ba620dc5@text.nova.planet.nl...
>> Hi All,
>>
>> I hope that someone can help me. I'm desperate at this time. I can't get
>> my Linksys WVC54G Camera over IP working. Does someone kow how to do
>> this.
>> If I use the internal network everything is OK. Whe I try to reach the
>> Camera through the Internet I can not approach it ........ Who ca help me
>> with the settings.
>>
>> Thanks,
>> Greetings,
>>
>> Ron Mostaard
>
> Ron, you will need to logon to the Speedtouch510 and setup a NAPT
> Go to http://10.0.0.138 and login
>
> Now select Advanced > NAPT and click on New
> Leave Protocol as it (TCP)
> Inside IP is the LAN IP of the webcam
> Leave outside IP: 0.0.0.0
> I'm not sure what your inside port is, but as you can access it, you will
> know. Use that for the Inside and Outside port.
> Click on Apply, and Save all (left top)
>
> Good luck,
>
> Noël
>
> --
> http://webcam.kijk.info
> http://www.resize2mail.com
>
>