Spin Retry count, End to End Error rate

[Ra1z0]

I've been worried about the current threshold of my main hard drive Seagate (ST3250318aS - 250.0 GB)

with his current Attribute of

- Spin Retry count -
Current: 100
Worst: 100
Threshold: 97
Raw Values: All Zero's

- End to End Error Rate -
Current: 100
Worst: 100
Threshold: 99
Raw Values: All Zero's

it's current health in HDD life is 72% also it's own performance
in Hard disk sentinel it's 100% all green condition
in crystal Disk it's in Good or all green condition

while in other Attributes are in medium or normal threshold value from it's value to worst.
i've just learned that when the threshold value is equal or near equal or more than it's current value or worst it means hard drive is failing?! is that true?

 

[Ubrales]

What is the re-allocated sectors count? raw value? If this is zero, all is fine.

 

[Ra1z0]

What is the re-allocated sectors count? raw value? If this is zero, all is fine.

- Reallocated Sectors count -
Current: 100
Worst: 100
Threshold: 36
Raw Values: All Zero's

 

[Ra1z0]

For Clearer Value i screenshot the current Attributes of the hard drive itself using Crystal disk

This is facebook link direct images:
1) https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xta1/v/t1.0-9/11133712_1080560345292614_6535687351483891019_n.jpg?oh=f2cddcff7656014ebf87a9e2876e71a7&oe=55E41B41&__gda__=1436943292_d69296ad59a34905858559d977da73db

2) https://scontent-lax.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/13107_1080560335292615_5913425587997193366_n.jpg?oh=7433b77fb8de495af4c6fcda5eb6be1b&oe=559C281E

 

[Ubrales]

From these values you have a good HDD.

 

[fzabkar]

@Ra1z0, HDD Life's author doesn't understand the SMART attributes. S/he erroneously assumes that those two attributes are failing simply because their current normalised values are too close to their thresholds. In fact they are perfectly OK.

 

[Ra1z0]

@Ra1z0, HDD Life's author doesn't understand the SMART attributes. S/he erroneously assumes that those two attributes are failing simply because their current normalised values are too close to their thresholds. In fact they are perfectly OK.

i deeply apologize for late response....
apologies if im not well informed about HDD attributes...
Thank you for the efforts of telling me the answers about this questions...
hope i could give some credits in return xDDD

 

[Ra1z0]

From these values you have a good HDD.

Apologies for very late response....
Thank you very much for giving a check on my hdd's attribute...
apologies... i wasn't well informed about these kind of stuff... and rely on my intuition that "it's close to the value... it might start to fail soon."
Thank you for such effort! ~
i hope i could give some credits in return xDDD