Splitting Jetflos to this mobo

[SimplyCurious]

Jetflo Amps - 0.4
Voltage is 12v

Motherboard link

https://www.asus.com/us/Motherboards/Z97PROWiFi_ac/

What I want to know is if I could split two of these to one motherboard header , 1 amp/ 12 watts . This includes if the header won't blow in startup voltage.

Thanks

 

[Drew010]

Theoretically, yes. I wouldn't do it though. (I have 5 Jetflos, all running off of a powered PWM hub)

 

[SimplyCurious]

Theoretically, yes. I wouldn't do it though. (I have 5 Jetflos, all running off of a powered PWM hub)

I'm also going to be running some corsair af120 LED fans, do you think I should just get a swiftech hub and power everything from there?

 

[Drew010]

Theoretically, yes. I wouldn't do it though. (I have 5 Jetflos, all running off of a powered PWM hub)

I'm also going to be running some corsair af120 LED fans, do you think I should just get a swiftech hub and power everything from there?

Yeah you can definitely do that! Just note that the Jetflo fans are PWM and the Swiftech hub is a PWM hub, so you'll want to make sure the Corsair ones are PWM as well otherwise they'll run at 100% speed

 

[SimplyCurious]

Theoretically, yes. I wouldn't do it though. (I have 5 Jetflos, all running off of a powered PWM hub)

Question, do you think I will be able to split 6 Jetflos off a swiftech hub?

 

[SimplyCurious]

I'm planning on putting the hub on the CPU Opt / CPU fan and then run all 6 of them from the hub.

Two questions

One, does the hub need to be in the CPU fan, or could I put it in the OPT?

Two, will splitting 6 Jetflos weaken the PWM signal on the splitter?

 

[Drew010]

It does need to be on the CPU fan, and no, it won't weaken the PWM signal

 

[SimplyCurious]

It does need to be on the CPU fan, and no, it won't weaken the PWM signal

Sorry for the delay, but I finished it. Managed to get all the fans into the splitter (6) and onto the CPU_Opt, it actually works.Found this out after switching my heatsink fan from CPU opt to CPU after my mobo not posting because it didn't detect a CPU Fan

 

[Drew010]

No problem, hope you like it!