For some reason, either my boot drive or storage SSD suddenly fail to be recognized by my bios after I added a storage 2TB SATA SSD. On ocassion, the 500GB Boot Drive SSD or the 2TB SSD won't be recognized by the BIOS or Windows. Both won't be recogized at the same time. I have no idea what the problem is. I already checked the power cables and plugged them into 2 seperate power cables just to make sure it's not a power issue. I recently turned the power off twice, the BIOS would only recognize the HDD and one of the two SSD's, never both at the same time. Checked the 500GB boot drive through Samsung Magician. Says it's fine. I just need to get my BIOS and PC to recognize both at the same time without having to worry about my pc all the time.
Edit: The 2TB SSD just came back from a data recovery facility and worked just fine in a ssd dock before I connected it to my pc internally via SATA cable.
My PC Specs are:
CPU: Ryzen 7 2700X
2x8GB Dual Channel DDR4-2133
MOBO: Taichi X470 BIOS P 2.00
500GB Samsung 870EVO SSD
2TB Samsung 870EVO SSD
2 TB 7200 RPM HDD Seagate hybrid drive
GPU: EVGA GEFORCE GTX 1080TI
OS: Windows 10 Pro 64-bit.
Power: Corsair RM850X
Edit: The 2TB SSD just came back from a data recovery facility and worked just fine in a ssd dock before I connected it to my pc internally via SATA cable.
My PC Specs are:
CPU: Ryzen 7 2700X
2x8GB Dual Channel DDR4-2133
MOBO: Taichi X470 BIOS P 2.00
500GB Samsung 870EVO SSD
2TB Samsung 870EVO SSD
2 TB 7200 RPM HDD Seagate hybrid drive
GPU: EVGA GEFORCE GTX 1080TI
OS: Windows 10 Pro 64-bit.
Power: Corsair RM850X
Last edited: