so today i discovered the magic of ramdisk.
as i did, i decided to run some benchmark on all of my drives just to compare speed.
this is the result: http://i.imgur.com/ftIqZnN.png
now, i looked at that, and, well, the ssd speed was rather on the slow side.
ssd is an ocz agility3 120gb.
so i asked around and got told to check the sata controller.
i rebooted, went into bios, and sure enough, sata controller is in ide mode, not ahci.
the ssd physically is connected to a sata3 6gb/s port.
simply flicking the setting in the bios made it not want to boot.
i tried it after doing the windows kb 922976 fix and that didn't help.
motherboard is an asus m5a88-m running 1601 bios.
system is windows7-64, i also have a secondary hdd connected where games/films are installed etc
so, is there any way to set it to ahci and have it work, without reinstalling all of the things?
thanks in advance
as i did, i decided to run some benchmark on all of my drives just to compare speed.
this is the result: http://i.imgur.com/ftIqZnN.png
now, i looked at that, and, well, the ssd speed was rather on the slow side.
ssd is an ocz agility3 120gb.
so i asked around and got told to check the sata controller.
i rebooted, went into bios, and sure enough, sata controller is in ide mode, not ahci.
the ssd physically is connected to a sata3 6gb/s port.
simply flicking the setting in the bios made it not want to boot.
i tried it after doing the windows kb 922976 fix and that didn't help.
motherboard is an asus m5a88-m running 1601 bios.
system is windows7-64, i also have a secondary hdd connected where games/films are installed etc
so, is there any way to set it to ahci and have it work, without reinstalling all of the things?
thanks in advance
Facebook
Twitter
Instagram