Stability of 15ns and 8ns PC100

[McEwin]

I currently have 128MB of PC100 non-parity 168pin DIMM running with a 15ns access time. I am going to add futher memory but the best option is Crucials (same spec) memory which runs with an 8ns access time.

Does anyone know of any stability problems that I may encounter (possibly when overcocked too). What would be the effect to the system or the memory modules if they ran along side eachother?

Thanks in advance
regards
McEwin.


\/ ANSWER MY QUESTION LOWER DOWN PLEASE \/
<P ID="edit"><FONT SIZE=-1><EM>Edited by McEwin on 04/25/01 07:35 AM.</EM></FONT></P>

 

[Guest]

It should work out fine as long as the memory timings and speed work with the slowest dimm you have installed.

--------
I have not yet begun to procrastinate.

 

[mpjesse]

Suggestion: ditch that PC100 RAM and just get all new PC133 RAM at CAS2.

-MP Jesse

"Signatures Still Suck"

 

[McEwin]

I have a SLot A Athlon 702Mhz@108x6.5 (originally 550Mhz) and a ASUS K7M motherboard. (AMD751/VIA686)

Will the PC133 work on the ASUS K7M motherboard?

Also (in the mean time) would the PC133 work along side the PC100 until I do ditch it or does the same rule as above apply?

The board won't overclock over 110Mhz FSB, so is it realy worth it?

Thanks
McEwin.