Here's what happened. I got a computer I built a while back and set it up. At first it was starting and stopping, I press the power, fans go on, no lights, runs for 3 seconds turns off. Turns on again runs for 3 seconds turns off etc... Anyway I took it apart cleaned the motherboard of dust and things, put it back together and now it boots. Great. But still windows was not installed, so I downloaded a windows 10 torrent ( I HAVE AN ORIGINAL SERIAL) but I couldn't find the download spot for windows 10 so I just got a torrent version. I installed it, ran a usb creation file it came with and it installed the bootable version onto my 8gb usb.
I then plugged this in my pc, booted, and it automatically detected it and windows install started. When it come to the "choose disk" section, I noted there were two partitions, or disks actually but I thought they were partitions (im a noob) so I ran diskpart cleaned both so basically deleted the windows software from the usb itself. So then it wouldn't install. So then after realizing what I accidentally did. I plugged both into my laptop and once again create a primary partition and formatted to NTFS. Then I made the copy of win 10 installation on the usb again. Plugged both back in and tried booting. But now, every time I click boot from usb, it just says "loading operating system" on a black screen and nothing happens. The odd part is that the first time I tried it worked, the windows install was running, it just all got messed up when I cleaned and formatted the Hard Drives.
FULL SPECS:
Gigabyte GAH6N1-USB-3
2 x 3gb kingston ddr3 ram
SATA hard drive seagate 500gb
NO external VGA
Antec 150 W pw.supply
Things ive tried.
- Running the windows install from usb formatted to both FAT32 and NTFS.
- Removing bios batter and reinserting.
- Trying different usb ports, running with and without SATA hard drive plugged in.
- Removing one stick of ram, and trying one stick in both ram slots.
- Changing sata to both IDE and AHIC mode.
- Ive reset the bios totally to how it first was by removing battery, then I formatted the SATA to clean and NTFS on laptop, then I formatted usb to NTFS, installed the usb installer, so now it should all be back to defaults when I hook it up. Run it, boot from UBS, and still get "loading operating system..." screen never goes beyond that.
- I checked to see if the usb was actually being detected by taking it out, then still going boot usb and it says "operating system wasn't found" so i guess it IS detecting the usb.
I then plugged this in my pc, booted, and it automatically detected it and windows install started. When it come to the "choose disk" section, I noted there were two partitions, or disks actually but I thought they were partitions (im a noob) so I ran diskpart cleaned both so basically deleted the windows software from the usb itself. So then it wouldn't install. So then after realizing what I accidentally did. I plugged both into my laptop and once again create a primary partition and formatted to NTFS. Then I made the copy of win 10 installation on the usb again. Plugged both back in and tried booting. But now, every time I click boot from usb, it just says "loading operating system" on a black screen and nothing happens. The odd part is that the first time I tried it worked, the windows install was running, it just all got messed up when I cleaned and formatted the Hard Drives.
FULL SPECS:
Gigabyte GAH6N1-USB-3
2 x 3gb kingston ddr3 ram
SATA hard drive seagate 500gb
NO external VGA
Antec 150 W pw.supply
Things ive tried.
- Running the windows install from usb formatted to both FAT32 and NTFS.
- Removing bios batter and reinserting.
- Trying different usb ports, running with and without SATA hard drive plugged in.
- Removing one stick of ram, and trying one stick in both ram slots.
- Changing sata to both IDE and AHIC mode.
- Ive reset the bios totally to how it first was by removing battery, then I formatted the SATA to clean and NTFS on laptop, then I formatted usb to NTFS, installed the usb installer, so now it should all be back to defaults when I hook it up. Run it, boot from UBS, and still get "loading operating system..." screen never goes beyond that.
- I checked to see if the usb was actually being detected by taking it out, then still going boot usb and it says "operating system wasn't found" so i guess it IS detecting the usb.
Facebook
Twitter
Instagram