[SOLVED] stuck on windows logo after enabling hyperthreading

Jul 10, 2020
9
0
10
i get way too many stutters with the i7 2600 with a gtx 1650, it is usually at 100% with a lot of stutters and when i enabled hyper threading it would be stuck on a windows logo and not giving power to my keyboard or mouse
 
Solution
Can you clear the CMOS and try again? If you have a highend motherboard or case, you might have a Clear CMOS button on the case, or a button directly on the board. Otherwise, you will likely need to remove the CMOS battery. But double check your mobo manual.
it turns out all i had to do was restart it when it was frozen and it booted up into windows, thank you so much for the help i appreciate it
i get way too many stutters with the i7 2600 with a gtx 1650, it is usually at 100% with a lot of stutters and when i enabled hyper threading it would be stuck on a windows logo and not giving power to my keyboard or mouse
Can you clear the CMOS and try again? If you have a highend motherboard or case, you might have a Clear CMOS button on the case, or a button directly on the board. Otherwise, you will likely need to remove the CMOS battery. But double check your mobo manual.
 
Can you clear the CMOS and try again? If you have a highend motherboard or case, you might have a Clear CMOS button on the case, or a button directly on the board. Otherwise, you will likely need to remove the CMOS battery. But double check your mobo manual.
it turns out all i had to do was restart it when it was frozen and it booted up into windows, thank you so much for the help i appreciate it
 
Solution