Stuck with overclocking Asus P5QPL-AM + Intel E5400 @3.2GHz

[hgaaditya]

Hello guys,I have a Asus P5QPL-AM + Intel E5400 wolfdale processor at 2.7GHz...
Right untils now i thought that the 3.2 GHz with "AI Overclocking" wa the max i could go.
But now I have put the overclocking to manual mode and Increased the FSB to 245,,And multiplier to 13.5 (this is the mas multiplier). The problem is I cant increase the FSB above 245,, If i do Windows says it ran into a problem and has to restart,,basically i go into a boot loop..So i increased RAM voltage to almost 1.89~1.902 and the NB voltage to 1.275,and PCI-E frequency is auto..
After this it boots sometimes, Even if it boots up,the Nvidia Drivers stop responding,,or sometimes,windows itself hangs..

So please let me know what am I doing wrong here, Also I read many forums,,but couldn't find any particular solution or guide for my mobo.

So any advice is welcome...
Thanks in advance.. 😀

 

[hgaaditya]

Hey guys just now I found another thread with same problem,,i tried his method, Which is bringind down ram to 667 mhz first and then increasing FSB,,even this not working. So please help me.