Question Supermicro X10DAi

[GreenEntusiast]

Hi,

I am stripping a DELL Poweredge r630 and want to know if primarily this memory and cpu is compatible with Supermicro X10DAi?

My plan is to move the components to standard atx motherboard and a large tower case with enough good airflow and still as quiet as possible. AIO Coolers etc.

16 modules of
Hynix
32GB 2Rx4 PC4 -2400T-RB1-11

2pcs Intel XEON

E5-2650V4
SR2N3 2.2Ghz
https://ark.intel.com/content/www/u...-processor-e5-2650-v4-30m-cache-2-20-ghz.html

 

[kanewolf]

Hi,

I am stripping a DELL Poweredge r630 and want to know if primarily this memory and cpu is compatible with Supermicro X10DAi?

My plan is to move the components to standard atx motherboard and a large tower case with enough good airflow and still as quiet as possible. AIO Coolers etc.

16 modules of
Hynix
32GB 2Rx4 PC4 -2400T-RB1-11

2pcs Intel XEON

E5-2650V4
SR2N3 2.2Ghz
https://ark.intel.com/content/www/u...-processor-e5-2650-v4-30m-cache-2-20-ghz.html

It should be.
I would be concerned about AIO water cooling. There will be no airflow over the VRMs around the CPU sockets.

 

[GreenEntusiast]

It should be.
I would be concerned about AIO water cooling. There will be no airflow over the VRMs around the CPU sockets.

It should be.
I would be concerned about AIO water cooling. There will be no airflow over the VRMs around the CPU sockets.

I am looking at one of these three cases:

• Corsair Carbide 275R Airflow
• Corsair Obsidian 750D Airflow Edition
• Corsair Carbide Air 540 Cube Case

The "Corsair Carbide Air 540 Cube Case" look nice, but seems that it has little room for disks!?
Maybe, the Obsidian case is a better choice!?

 

[GreenEntusiast]

I am looking at one of these three cases:

• Corsair Carbide 275R Airflow
• Corsair Obsidian 750D Airflow Edition
• Corsair Carbide Air 540 Cube Case

The "Corsair Carbide Air 540 Cube Case" look nice, but seems that it has little room for disks!?
Maybe, the Obsidian case is a better choice!?

Has anyone maybe other suggestions in choice of motherboard for these components?