Switch to PC via IO box

Status
Not open for further replies.

kaushik

Distinguished
Mar 13, 2008
48
0
18,530
Hello everybody,

In my office there is a small network with 5 PCs. A long time ago one network engineer had connected 5 PCs to 8 port switch via IO box. Now two IO box connectors are not working. The IO box he set, now not available. The available IO box connectors do not match the color code with the old one. In which positions those 8 wires of the CAT5 cable will be punched into the IO box connector? Will anyone pl help me to understand the color code of IO box connector to get network connection.
The CAT5 Cable color code in RJ45 jack, attached to switch, is as below :
Pin 1 : White/Orange
Pin 2 : Orange
Pin 3 : White/Green
Pin 4 : Blue
Pin 5 : White/Blue
Pin 6 : Green
Pin 7 : White Brown
Pin 8 : Brown

Which wire will be connected to which pin of IO box connector? I saw different positions of color codes in different IO box connectors.

Regards,

Kaushik
 

kaushik

Distinguished
Mar 13, 2008
48
0
18,530
U know Keystone I/O jack. im telling about that jack attached with a fiber box. im using here this I/O jack but not Keystone's. I connected the wire matching the color code with A or, B mentioned in the jack. but no connectivity i found. what may be the probs?
 
Status
Not open for further replies.

TRENDING THREADS