System doesnt find M.2 SSD for windows installing

h3xthegamer

Prominent
Aug 28, 2017
15
0
510
I started to install windows,but it doesnt show the ssd,please help asap.
Its a new build,just got the bios to work.
Thanks in advance.
 
Solution
No details given as to whether drive is SATA or PCIe. No OS listed.

The background here is NVME SSDs do not appear within the BIOS until Windows creates the system partition with the EFI Boot Sector. Your M.2 SSD contains UEFI driver information within the firmware. By disabling the CSM module Windows will read and utilize the M.2-specific UEFI driver.

Guide for installing Windows 10 on NVMe M.2 drive:

1- The M.2 drive has to be the only drive installed.

2 - Go into the bios, under the boot tab there is an option for CSM, make sure it is disabled.

3 - Click on secure boot option below and make sure it is set to other OS, not windows UEFI.

4 - Click on key management and clear secure boot keys.

5 - Insert a USB memory...


Most likely you need to active the M.2 feature in your BIOS...the motherboard manual should have a section dedicated to installing M.2 drives
 
No details given as to whether drive is SATA or PCIe. No OS listed.

The background here is NVME SSDs do not appear within the BIOS until Windows creates the system partition with the EFI Boot Sector. Your M.2 SSD contains UEFI driver information within the firmware. By disabling the CSM module Windows will read and utilize the M.2-specific UEFI driver.

Guide for installing Windows 10 on NVMe M.2 drive:

1- The M.2 drive has to be the only drive installed.

2 - Go into the bios, under the boot tab there is an option for CSM, make sure it is disabled.

3 - Click on secure boot option below and make sure it is set to other OS, not windows UEFI.

4 - Click on key management and clear secure boot keys.

5 - Insert a USB memory stick with a UEFI bootable ISO of Windows 10 on it, USB3 is quicker but USB2 works also. A Windows DVD won’t work unless you’ve created your own UEFI Bootable DVD.

6 - Press F10 to save, exit and reboot.

7 - Windows 10 will now start installing to your NVME drive as it has its own NVME driver built in.

8 - When the PC reboots hit F2 to go back into the BIOS, you will see under boot priority that windows boot manager now lists your NVME drive.

9 - Click on secure boot again but now set it to WIndows UEFI mode. (see #3 above)

10 - Click on key management and install default secure boot keys

11 - Press F10 to save and exit and windows will finish the install. Once you have Windows up and running, shutdown the PC and reconnect your other SATA drives.

I would also recommend installing the Samsung NVME driver at this point to replace the Windows one. (optional)
 
Solution