System is on but no display-D945GNT

[Anand_7]

Hi Myself Anand,

Please find my System info.

CPU 0: 3400MHz, Intel(R) Pentium(R) D CPU 3.40GHz, x86 Family 15 Model 6 Stepping 4
CPU 1: 3400MHz, Intel(R) Pentium(R) D CPU 3.40GHz, x86 Family 15 Model 6 Stepping 4
OS: Windows NT(Version 2001473568.2001954240 Build 2)
Video: NVIDIA GeForce GT-720

DirectX: 9.0c(4.09.00.0904)
Memory: All: 2,097,152 KB, Available: 2,097,152 KB, Used: 0%
CodePage: 1252, Charset:1
Instruction: MMX MMX2 SSE SSE2 SSE3 64Bits

OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ANAND-PC
System Manufacturer INTEL_
System Model D945GNT_
System Type X86-based PC
Processor Intel(R) Pentium(R) D CPU 3.40GHz, 3400 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Intel Corp. NT94510J.86A.4119.2009.0113.1807, 13-Jan-09
SMBIOS Version 2.5
Windows Directory D:\Windows
System Directory D:\Windows\system32
Boot Device \Device\HarddiskVolume2
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name ANAND-PC\ANAND
Time Zone India Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.25 GB
Available Physical Memory 2.42 GB
Total Virtual Memory 6.49 GB
Available Virtual Memory 5.65 GB
Page File Space 3.25 GB
Page File D:\pagefile.sys


I had this problem earlier and figured out the solution.

[u]Please note:This is my system configuration and i know it.So i have taken up the risk and have done it.I don't guarantee or claim this method will be successful to you .But if you want to take risk ,go ahead and try.[/u]



After searching the net for a while.
Finally unplugged all the wires , opened up the CPU case and cleaned it with soft brush.
remove the graphic card GT-720,removed CMOS battery,removed all 1 gb X 4 nos from all 4 slots.

Now i put back the graphic card and CMOS battery back.

in that you can see page no 12/74.

I remove the 4 ram from 4 slots slowly and i inserted only 2 ram one in Channel A DIMM 0 and another one in Channel B DIMM 0.

Put back the case and pugged all wires .


Swithched on the cpu.It said firmware has detected decrease in memory and system was started and display came.

Again i unplugged all thev wires opened the CPU and put back the other 2 ram in remaining slots.
Restarted the system it worked very well.

Thank you.

 

[Phillip Corcoran]

Thanks for a rundown of how you fixed the problem.