System lags when browsing

[Flyboy30126]

Hi Everybody, I have a i7-7700K running at 7.8. Lately when I am browsing on anything really, when I change like from mail to Yahoo homepage or anything my screen hesitates for about a second or so. Is this caused by my chip or my video card? My card is a EVGA GTX-1060 6gb. It is not overclocked by I have played with it some via YouTube tutorials just can't seem to get it right so I just stopped trying. My system follows. THANKS for the help!

i7-7700K
32 GB Ripjaws 2400
Corsair Hi-60 Water Cooling
ASUS Z270E Motherboard with latest BIOS update (I think its 906)? Anyway the latest
EVGA Bronze 850watt
Windows 10 Pro
Also, Comcast Blast High Speed....Using Speedtest I get 9ms ping and 89.5 on the download speed. THANKS AGAIN

 

[Grugbug]

Your 7700K is at 7.8GHz?

 

[Flyboy30126]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

 

[Grugbug]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

 

[Flyboy30126]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

Cache and temp files ect, yesterday. I have a 512gb M.2 on the motherboard, a 120 ssd and 1 TB as storage. These drives have never been defragged. But the system was only built about 3 months ago, however, I have a LOT of programs. Some like my 3dsmax 2017 and Maya 2017 send info back to Autodesk. THANKS for your help, I really do appreciate it! THANKS AGAIN.

 

[Grugbug]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

Cache and temp files ect, yesterday. I have a 512gb M.2 on the motherboard, a 120 ssd and 1 TB as storage. These drives have never been defragged. But the system was only built about 3 months ago, however, I have a LOT of programs. Some like my 3dsmax 2017 and Maya 2017 send info back to Autodesk. THANKS for your help, I really do appreciate it! THANKS AGAIN.

Don't defrag your SSDs let Windows manage them, make sure trimming is enabled.
Also, are all of your system drivers up to date?

 

[Flyboy30126]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

Cache and temp files ect, yesterday. I have a 512gb M.2 on the motherboard, a 120 ssd and 1 TB as storage. These drives have never been defragged. But the system was only built about 3 months ago, however, I have a LOT of programs. Some like my 3dsmax 2017 and Maya 2017 send info back to Autodesk. THANKS for your help, I really do appreciate it! THANKS AGAIN.

Don't defrag your SSDs let Windows manage them, make sure trimming is enabled.
Also, are all of your system drivers up to date?

When I checked Windows 10 was and had been doing the disk management for me. I'm just a loss. I was thinking about installing a dual boot installing 10 on my 120 SSD and seeing if it boot IE11 or Edge works any better. Is that a good idea or should I just wipe (and loose and re-install my programs). THANKS AGAIN!!

 

[Grugbug]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

Cache and temp files ect, yesterday. I have a 512gb M.2 on the motherboard, a 120 ssd and 1 TB as storage. These drives have never been defragged. But the system was only built about 3 months ago, however, I have a LOT of programs. Some like my 3dsmax 2017 and Maya 2017 send info back to Autodesk. THANKS for your help, I really do appreciate it! THANKS AGAIN.

Don't defrag your SSDs let Windows manage them, make sure trimming is enabled.
Also, are all of your system drivers up to date?

When I checked Windows 10 was and had been doing the disk management for me. I'm just a loss. I was thinking about installing a dual boot installing 10 on my 120 SSD and seeing if it boot IE11 or Edge works any better. Is that a good idea or should I just wipe (and loose and re-install my programs). THANKS AGAIN!!

Have you tried unplugging your router and modem for a few minutes?
You might just need a hardware reset.

 

[Flyboy30126]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

Cache and temp files ect, yesterday. I have a 512gb M.2 on the motherboard, a 120 ssd and 1 TB as storage. These drives have never been defragged. But the system was only built about 3 months ago, however, I have a LOT of programs. Some like my 3dsmax 2017 and Maya 2017 send info back to Autodesk. THANKS for your help, I really do appreciate it! THANKS AGAIN.

Don't defrag your SSDs let Windows manage them, make sure trimming is enabled.
Also, are all of your system drivers up to date?

When I checked Windows 10 was and had been doing the disk management for me. I'm just a loss. I was thinking about installing a dual boot installing 10 on my 120 SSD and seeing if it boot IE11 or Edge works any better. Is that a good idea or should I just wipe (and loose and re-install my programs). THANKS AGAIN!!

Have you tried unplugging your router and modem for a few minutes?
You might just need a hardware reset.

Yep, don't have a router but I was also thinking about the modem. I think maybe they might need to get me a new one. However, I keep running speedtest and I usually get a 9sec ping and an 86-89 download speed. THANKS for the help again!!

 

[Grugbug]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

Cache and temp files ect, yesterday. I have a 512gb M.2 on the motherboard, a 120 ssd and 1 TB as storage. These drives have never been defragged. But the system was only built about 3 months ago, however, I have a LOT of programs. Some like my 3dsmax 2017 and Maya 2017 send info back to Autodesk. THANKS for your help, I really do appreciate it! THANKS AGAIN.

Don't defrag your SSDs let Windows manage them, make sure trimming is enabled.
Also, are all of your system drivers up to date?

When I checked Windows 10 was and had been doing the disk management for me. I'm just a loss. I was thinking about installing a dual boot installing 10 on my 120 SSD and seeing if it boot IE11 or Edge works any better. Is that a good idea or should I just wipe (and loose and re-install my programs). THANKS AGAIN!!

Have you tried unplugging your router and modem for a few minutes?
You might just need a hardware reset.

Yep, don't have a router but I was also thinking about the modem. I think maybe they might need to get me a new one. However, I keep running speedtest and I usually get a 9sec ping and an 86-89 download speed. THANKS for the help again!!

Glad to help, I want your problem resolved as much as you do.

 

[Flyboy30126]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

Cache and temp files ect, yesterday. I have a 512gb M.2 on the motherboard, a 120 ssd and 1 TB as storage. These drives have never been defragged. But the system was only built about 3 months ago, however, I have a LOT of programs. Some like my 3dsmax 2017 and Maya 2017 send info back to Autodesk. THANKS for your help, I really do appreciate it! THANKS AGAIN.

Don't defrag your SSDs let Windows manage them, make sure trimming is enabled.
Also, are all of your system drivers up to date?

When I checked Windows 10 was and had been doing the disk management for me. I'm just a loss. I was thinking about installing a dual boot installing 10 on my 120 SSD and seeing if it boot IE11 or Edge works any better. Is that a good idea or should I just wipe (and loose and re-install my programs). THANKS AGAIN!!

Have you tried unplugging your router and modem for a few minutes?
You might just need a hardware reset.

Yep, don't have a router but I was also thinking about the modem. I think maybe they might need to get me a new one. However, I keep running speedtest and I usually get a 9sec ping and an 86-89 download speed. THANKS for the help again!!

Glad to help, I want your problem resolved as much as you do.

And, I Really APPRECIATE it!! THANK YOU!!

 

[Flyboy30126]

Your 7700K is at 7.8GHz?

DARN, SORRY...4.8

Wanted to make sure it wasn't throttling.......:lol:

When was the last time you cleared your browser and defragged your HD?

Cache and temp files ect, yesterday. I have a 512gb M.2 on the motherboard, a 120 ssd and 1 TB as storage. These drives have never been defragged. But the system was only built about 3 months ago, however, I have a LOT of programs. Some like my 3dsmax 2017 and Maya 2017 send info back to Autodesk. THANKS for your help, I really do appreciate it! THANKS AGAIN.

Don't defrag your SSDs let Windows manage them, make sure trimming is enabled.
Also, are all of your system drivers up to date?

When I checked Windows 10 was and had been doing the disk management for me. I'm just a loss. I was thinking about installing a dual boot installing 10 on my 120 SSD and seeing if it boot IE11 or Edge works any better. Is that a good idea or should I just wipe (and loose and re-install my programs). THANKS AGAIN!!

Have you tried unplugging your router and modem for a few minutes?
You might just need a hardware reset.

Yep, don't have a router but I was also thinking about the modem. I think maybe they might need to get me a new one. However, I keep running speedtest and I usually get a 9sec ping and an 86-89 download speed. THANKS for the help again!!

Glad to help, I want your problem resolved as much as you do.

Can anyone tell me what this means? Is my i7-7700K Bad?

[Sun Jun 11 15:48:19 2017]
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
FATAL ERROR: Rounding was 0.5, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Self-test 448K passed!
Self-test 448K passed!
Self-test 448K passed!
Self-test 448K passed!
[Sun Jun 11 15:53:23 2017]
Self-test 448K passed!
Self-test 448K passed!
Self-test 8K passed!