Hey,
Not so long ago I've build my pc. And had some problems with expo profile of RAMs (Kingston 2 x 32gb cl30 6000mhz), but after fine tuning it in BIOS (ASRock B850 Riptide WiFi) (according to and assistance with ASRock tech support:
- Clearing CMOS
- Removing one, then another ram stick, switch slots, etc.
- Boot without RAM (to trigger reset of some sort)
- Boot without SSD
- BIOS flashback (weird that mobo allowed me to do it)
- BIOS flashback to newest version (3.26 to 3.30)
- Boot without any USB devices
Nothing. Always goes to solid green light - boot device dysfunctional.
Can someone help me here? Or help understand which component is broken?
Pc specs:
9800x3d,
ASRock B850 Riptide WiFi,
Kingston 2 x 32gb cl30 6000mhz,
PNY RTX 5080,
Sn850x 2tb,
Kc3000 2tb,
Corsair RM850X
Win 11 pro
Not so long ago I've build my pc. And had some problems with expo profile of RAMs (Kingston 2 x 32gb cl30 6000mhz), but after fine tuning it in BIOS (ASRock B850 Riptide WiFi) (according to and assistance with ASRock tech support:
- Set Processor ODT Impedance to 60ohm from OC Tweaker/ DRAM Configuration/ DRAM Bus Control Configuration while EXPO profile loaded
- Increase SoC voltage to 1.25V
- Enable SoC/ Uncore OC mode from AMD Overclocking page
- Clearing CMOS
- Removing one, then another ram stick, switch slots, etc.
- Boot without RAM (to trigger reset of some sort)
- Boot without SSD
- BIOS flashback (weird that mobo allowed me to do it)
- BIOS flashback to newest version (3.26 to 3.30)
- Boot without any USB devices
Nothing. Always goes to solid green light - boot device dysfunctional.
Can someone help me here? Or help understand which component is broken?
Pc specs:
9800x3d,
ASRock B850 Riptide WiFi,
Kingston 2 x 32gb cl30 6000mhz,
PNY RTX 5080,
Sn850x 2tb,
Kc3000 2tb,
Corsair RM850X
Win 11 pro
Last edited: