I shut down the System yesterday and it was running just fine. Today it doesnt turn on. First I suspected the Power switch and shorted the Pins online the Board - nothing.
I then took out the psu and shorted the appropriate sockets on the connector - it turns on just fine. Voltages on the connector all seem slightly too low, but that could be my Multimeter. With 11.5 on 12v, 4.4 on 5, 2.5 on 3.3v and 4.2 on pwr ok.
Then I plugged back the 24pin and 8pin connector and tried shorting the Pins on the back of the Board - still no sign of life.
I guess The Board is done, but could this still be a psu issue because of the low Voltages? The LEDs that are usually lit when the PC is turned off are also not burning.
I then took out the psu and shorted the appropriate sockets on the connector - it turns on just fine. Voltages on the connector all seem slightly too low, but that could be my Multimeter. With 11.5 on 12v, 4.4 on 5, 2.5 on 3.3v and 4.2 on pwr ok.
Then I plugged back the 24pin and 8pin connector and tried shorting the Pins on the back of the Board - still no sign of life.
I guess The Board is done, but could this still be a psu issue because of the low Voltages? The LEDs that are usually lit when the PC is turned off are also not burning.