System won't receive power after clr_cmos

[MrEdpon]

My computer was not making it past "windows loading" and gave me 2 short beeps after the screen went black. Read it was a memory problem so I removed and reinstalled the RAM. That did not work, so I tried the Clr_cmos button on my mobo thinking maybe it was a config error or something. Now my computer won't receive power (no fans, LEDs, beeps etc.)

Computer hardware:

Asrock Z87 extreme 4

Intel 4770k

16gb Corsair vengeance

Corsair AX 750 watt PSU

 

[alexoiu]

Try reconnecting the 24 and 8 pin power cables and the case front panel wires. Make sure also that the power supply is turned on (maybe you turned it off when clearing the CMOS).

 

[MrEdpon]

Alright, I let my computer sit overnight and it decided to power on. Now I'm back to my original problem. I am getting 2 quick beeps after the "windows is loading" screen.

 

[alexoiu]

With single RAM stick inserted is it the same?

 

[MrEdpon]

Tried all suggestions, nothing has changed. Did get a stop error however. Maybe the code can help? 0x0000000A

Contacted Asrock support and they suggested flashing my Bios. Also did not help.

 

[alexoiu]

It looks like a driver/device issue.
Can you reinstall Windows?

 

[MrEdpon]

I suppose I could... Is there anything else it could be before I go and wipe everything?

 

[alexoiu]

Hard to say. i would firstly try reinstalling Windows, to rule out a driver issue. Backup your important data.