T-bird 1,4@1,6 and beyond

[IronManRR]

I overclocked my T-Bird 1,4 @ 1,54 by increasing the multiplier, temperature reading is 36C idle and 40C max.
Can I overclock it more, since temps are low???

I tried 1,6 but windows didnt startup, how to get it at 1,6 rock stable???
My cooling is a Vantec 6035D copper

The Bodybuilder computer Geek!!
It is better to die on ur feet then lives on ur knees.

 

[khha4113]

What is its core voltage when you overclock? You might need to increase it a little higher.

Good or Bad have no meaning at all, depends on what your point of view is.

 

[IronManRR]

default voltage, wich I cant remember what it is
I can add up to 0.4V...is it good?
mobo: EPOX 8k7a

The Bodybuilder computer Geek!!
It is better to die on ur feet then lives on ur knees.

 

[khha4113]

default voltage, wich I cant remember what it is
I can add up to 0.4V...is it good?

It should be set at 1.75V then, but probably your Hardware Monitor shows around 1.8V (my Abit KG7-RAID and Asus A7V-133 do that). You can up it ~1.8V to see if it's stable. If not you might have to go with its Max voltage (remember when you upping its voltage, the CPU's temp also increase so keep an eye on its temp).

Good or Bad have no meaning at all, depends on what your point of view is.

 

[IronManRR]

Well thanks, I will try that later and tell u if I could get it higher

The Bodybuilder computer Geek!!
It is better to die on ur feet then lives on ur knees.

 

[CALV]

should be fine if you increase the voltage, just watch the temps, I got a 1400@1700 on a kt7a raid (2.05v with mod and watercooled)


Next time you wave - use all your fingers