Question T-Force Delta RGB Rated 3200 MHz - Unstable @ 3200 MHz

[ScyberMhaster]

Good day!

My system specs: Rzyen 7 3700X / A520M-K Motherboard / 16GB (2 x 8GB) T-Force Delta RGB 3200 MHz / NVMe / RTX 3070 EX White

My problem is that, when I manually put the RAM to 3200 MHz, it is very unstable. I ran AIDA64 and MemTest64, both failed @ 3200 MHz. Random BSOD, App. Error, etc.

But when I tried 2400 MHz, 3000 MHz, and 3133 MHz, it run fine and stable.

I used DOCP or XMP 2.0 [Auto] on 3200 MHz, still unstable.

 

[ScyberMhaster]

Update: MemTest86 via Boot, results failed. Oh no.

 

[Roland Of Gilead]

Hey there,

Yes, errors on the mem are not good. Indicates faulty DIMMs. What happens when you run memtest at lower frequencies? Pass/Fail?

 

[Bob.B]

Update: MemTest86 via Boot, results failed. Oh no.

Proper bios?

If memtest86 runs error free at 3133 consider just leaving it.

You could try bumping the ram voltage one or two tenths of a volt.

 

[--SID--]

Motherboard BIOS fully up to date?

Ryzen is still picky on RAM. Is your kit on the memory QVL of the motherboard?