hi
today i built a pc with this config.
Asus prime b660Ma
12100
2*8 Gskill ram 3200mhz...
here are my problems,
1-on slot 2-4 , i could enable XMP and 3200 but on slot 1-3 i cant and it stuck on 2133mhz.
2- it take a really long time like 45scc when i press power botton to show asus logo and after that it shows a Bios error that i have to enter bios with f1 and on boot manager , chose my disk drive and like that i can go to windows....
here is the error:
the system has posted in safe mode.
this may be due to the previous POST attempt failing because of system instability.
or power botton was held in to force the system off. if the system failed to post after you made changes to ufei setting, you may wish to revert it back to stable setting and to prevent post failure.
Press f1 to run setup.
today i built a pc with this config.
Asus prime b660Ma
12100
2*8 Gskill ram 3200mhz...
here are my problems,
1-on slot 2-4 , i could enable XMP and 3200 but on slot 1-3 i cant and it stuck on 2133mhz.
2- it take a really long time like 45scc when i press power botton to show asus logo and after that it shows a Bios error that i have to enter bios with f1 and on boot manager , chose my disk drive and like that i can go to windows....
here is the error:
the system has posted in safe mode.
this may be due to the previous POST attempt failing because of system instability.
or power botton was held in to force the system off. if the system failed to post after you made changes to ufei setting, you may wish to revert it back to stable setting and to prevent post failure.
Press f1 to run setup.
Last edited: