taking apart Hanns-G 28" monitor case

[nss000]

Gents:

My 28" Hanns-G monitor has the notorius flicker problem ... PS bad caps no doubt.

On UTUBE I see detailed instructions for replacing the caps, but I have found only vague hand-waving ... **no** detailed step-by-step instructions for taking apart the Hanns-G 28" monitor case to get at the power supply. It is **not obvious** by inspection howto take-off the stand, remove the front-frame and back cover etcetc. I would appreciate any reference to such instructions.

 

[lfkfkfkffs]

A lot of monitors like that have a little plastic hinge on the top of the stand that if you squeeze both ends the top part of it will pop off. then normally you will find a set of screws. If it doesn't have that could you take a picture of the stand and the monitor with its screen facing down?