Tempertures for CPU at Idle is 60 degrees with Hyper evo 212?

[Jimmy Pritt]

Hello Guys. I bought a hyper evo 212 a few monthes ago, and just now started noting the temperatures I was getting. On idle I get about 60-63 degrees. On a full load I get 80-85 degrees. I use Speccy to test. Is it the program or is something else wrong?

 

[C12Friedman]

I'll suggest cleaning the heatsink real good with compressed air. Remove the fan(s) and clean them real good also. If that doesn't bring your temps down, you'll want to look into applying fresh thermal compound

 

[CompuTronix]

More information please.

Intel or AMD?

Which processor?

What is your ambient?

System specs?

CT

 

[Jimmy Pritt]

More information please.

Intel or AMD?

Which processor?

What is your ambient?

System specs?

CT

I have a AMD Athlon x4 760k

I do not know what you mean by ambient.

This is what I got from speccy:
Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD Athlon X4 59 °C
Richland 32nm Technology
RAM
8.00GB Dual-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
MSI FM2-A75MA-P33 (MS-7721) (P0) 37 °C
Graphics
LCDTV16 (1920x1080@60Hz)
2048MB ATI AMD Radeon R9 200 Series (Gigabyte) 41 °C
Storage
931GB Seagate ST1000DM 003-1CH162 SATA Disk Device (SATA) 35 °C
3GB SanDisk Cruzer USB Device (USB)
Optical Drives
ASUS DRW-24B1ST i SATA CdRom Device
Audio
AMD High Definition Audio Device

 

[CompuTronix]

Ambient means room temperature, or more correctly, the temperature at your computer's air intake.

 

[Jimmy Pritt]

Ambient means room temperature, or more correctly, the temperature at your computer's air intake.

Ah. Around 21 degrees.

 

[Jimmy Pritt]

I'll suggest cleaning the heatsink real good with compressed air. Remove the fan(s) and clean them real good also. If that doesn't bring your temps down, you'll want to look into applying fresh thermal compound

I did everything you said, and I am still getting 60-65.

 

[C12Friedman]

I think the next step here would be along these lines http://www.tomshardware.com/forum/8263-63-simple-free-guide-removing-malware I'll also recommend running Malwarebytes in windows when done with those steps. I'm thinking something's going on here that isn't quite on the up and up

 

[Jimmy Pritt]

I think the next step here would be along these lines http://www.tomshardware.com/forum/8263-63-simple-free-guide-removing-malware I'll also recommend running Malwarebytes in windows when done with those steps. I'm thinking something's going on here that isn't quite on the up and up

I apologize for the late response, but this was ran after a fresh install of windows. I will follow the instruction just in case to see if it helps.