Tenda model w316r

[Ilijas Ramic]

Soo I brought this because the thunder [watch your language] up my pc and router soo I setupit via phone and I have no problems internetbut now I cant get into thw configuration site via ipadress I got it first time but now I cant get to the site

 

[Jester Maroc]

The default IP for it is: 192.168.0.1

So change the IP on your PC to static and make it 192.168.0.29, then try loading the config page again.

Change what you wish to change in the router, then change back the IP on your PC to "obtain IP automatically"

Let me know if you have any problems.

 

[Ilijas Ramic]

The problem is my psu burned up when the thunder storm hitted near my house intoelectric wire ao I brought the router few hours and I setup it via phone I typed the ip adress and it got me into tendas admin site but now I cant get into it

 

[Jester Maroc]

OK, try to adjust the IP on your phone. You can make it static as well.

 

[Ilijas Ramic]

Well the ruter is qorking but I cant get into the site to change aome configurations

 

[Jester Maroc]

Right, which is why I want you to try to change the IP on your phone to static to see if you can access the router that way.

 

[Ilijas Ramic]

192.168.0.29 soo this ip to put into static

 

[Jester Maroc]

192.168.0.29 soo this ip to put into static

Yes, just remember to change it back to automatic after you adjusted the settings in configuration.

 

[Ilijas Ramic]

Thx man for helping

 

[Ilijas Ramic]

Why do I need to chage it back ???

 

[Ilijas Ramic]

Well after reebot it changed it automaticly back to default

 

[Ilijas Ramic]

Thx for helping xd I setup everything via phone XD

 

[Jester Maroc]

No problem, changing it back to automatic is to ensure that you do not get an IP conflict in the future if you have many people over with lots of devices.

 

[Ilijas Ramic]

Hej btw I have large space around the house and I want to buy 2-3 more routers and around 50m ethernet cabel too setup routers soo I can connect from any corner around the house what is the progress for that

 

[Ilijas Ramic]

Process

 

[Jester Maroc]

If you plan to create a large Wifi like that I would recommend getting a switch through which the other routers (access points) can connect. However, you will need a couple of things first:

1) A working, always-on, broadband internet access with a DSL or cable modem. At the moment this is your Tenda.

2) One or more secondary routers to act as Access Points.

Here is a good guide: http://www.howtogeek.com/104469/how-to-extend-your-wi-fi-network-with-simple-access-points/

 

[Ilijas Ramic]

Hejj guys I have a weird shit I have some kind of tablet gbook but when I connect to wifi it says Sign in to a wifi network how tofix that

 

[Ilijas Ramic]

Thx btw I have modem and a router modem for internet wired and router for wireless is it possible to get multiply routers too work as a one access point

 

[Ilijas Ramic]

My idea is too get 2 more routers and make the ssid same soo I dont need to switch from one acces point to another just to make one single network access point and the second router just too boost the signal for the area where I cant get it is it possible? ?