Case: Thermaltake Core V31 CPU Cooler - Cryorig H7 with 120mm Thermaltake Riing fan Case Fans: Thermaltake Riing 12 x6; and Riing 14 x2
Current setup:
Intake - 3x Riing 12 in front
Intake - 2x Riing 12 at bottom-front and bottom-middle
Intake - 1x Riin 14 at top-front
Exhaust - 1x Riing 12 at rear
Exhaust - 1x Riing 14 at top-rear
^^^This is not my actual case, just a pic for illustration purposes...
The HDD cage is located at front bottom. I did have it mounted in the middle position, but noticed that it was blocking airflow from the front to the GPU (XFX RX 580 4GB). I also used to have a Riing 14 mounted at the top-middle as exhaust, but suspected that it was sucking out air from the front and bottom before it could be blown into the gpu, so I flipped to intake and placed at the front-top to push air behind the front fans and get it pushed to the GPU.
I'd appreciate any thoughts, criticisms, etc. Thanks in advance.
Current setup:
Intake - 3x Riing 12 in front
Intake - 2x Riing 12 at bottom-front and bottom-middle
Intake - 1x Riin 14 at top-front
Exhaust - 1x Riing 12 at rear
Exhaust - 1x Riing 14 at top-rear
^^^This is not my actual case, just a pic for illustration purposes...
The HDD cage is located at front bottom. I did have it mounted in the middle position, but noticed that it was blocking airflow from the front to the GPU (XFX RX 580 4GB). I also used to have a Riing 14 mounted at the top-middle as exhaust, but suspected that it was sucking out air from the front and bottom before it could be blown into the gpu, so I flipped to intake and placed at the front-top to push air behind the front fans and get it pushed to the GPU.
I'd appreciate any thoughts, criticisms, etc. Thanks in advance.