Thermaltake Core X9 -- Is this fan setup good for airflow?

[The_Gen_Eric]

The Core x9 is an absolutely gargantuan case, and as such I'm concerned about airflow on this thing. I plan on having the 200mm bottom fan on the front intake, 4 120mm intakes on the top, towards the rear, where the motherboard is, and 2 140mm exhausts on the back, one on the top right and one on the bottom left. Will this cause any issues regarding airflow, or will it keep it sufficiently cool?

 

[mcnumpty23]

should be fine

looks like it has the possibility of a second 200mm at the front though not sure if you would need to remove anything to use that

but don't think you will need the second 200mm

it looks like it has areas where its perforated those should let warm air escape as well

 

[The_Gen_Eric]

should be fine

looks like it has the possibility of a second 200mm at the front though not sure if you would need to remove anything to use that

but don't think you will need the second 200mm

it looks like it has areas where its perforated those should let warm air escape as well

Thanks, my biggest concern was the intakes on top being immediately sucked out by the exhaust, but it will be fine?

 

[mcnumpty23]

should be fine

looks like it has the possibility of a second 200mm at the front though not sure if you would need to remove anything to use that

but don't think you will need the second 200mm

it looks like it has areas where its perforated those should let warm air escape as well

Thanks, my biggest concern was the intakes on top being immediately sucked out by the exhaust, but it will be fine?

i think so its pretty standard though on a bigger scale lol

i have 3 x 120mm on top intaking and 1 x 140mm on rear out

and 2 x 140mm on the front intaking

seems to work fine though any issues you could just flip the top fans to out instead of in and see if it makes a difference or not

 

[The_Gen_Eric]

should be fine

looks like it has the possibility of a second 200mm at the front though not sure if you would need to remove anything to use that

but don't think you will need the second 200mm

it looks like it has areas where its perforated those should let warm air escape as well

Thanks, my biggest concern was the intakes on top being immediately sucked out by the exhaust, but it will be fine?

i think so its pretty standard though on a bigger scale lol

i have 3 x 120mm on top intaking and 1 x 140mm on rear out

and 2 x 140mm on the front intaking

seems to work fine though any issues you could just flip the top fans to out instead of in and see if it makes a difference or not

Alright, thanks. One last note, does the PSU fan face up or down? I only ask because I noticed part of the bottom filter was obstructed by the case stand.

 

[mcnumpty23]

i would have the fan upward

though others would have it downwards

its one of those either way could be right things