these numbers ok to you guys? found asus dual intelligent processor 5 !

[Peanut2013uk]

CPU_voltage's

can some competent person look at these voltages and see if they are good and or correct? CPU-z is showing 1.337 which i know is good, but the asus intelligent processor 5 is showing 1.4v +25 currently 1.423v system seem stable, (even though the software pushed my cpu all the way to 4500mhz where I almost craped my pants before my system shut down and went to 4400mhz for a 29% increase which I was aiming for anyway.

just want to know if I'm burning the candle at both ends ! don't want my cpu to burn out as 1.4v is the top end so I heard.

 

[scuzzycard]

That's a lot of voltage. I usually recommend up to 1.4V for the smaller 14nm chips, but I'd be more comfortable recommending 1.35V for the larger ones (like yours).

 

[Peanut2013uk]

That's a lot of voltage. I usually recommend up to 1.4V for the smaller 14nm chips, but I'd be more comfortable recommending 1.35V for the larger ones (like yours).

so mine is 1.423? or is it 1.337 as cpu-z claims? also there have been no issues with benckmarks or stress tests system seems stable.

 

[scuzzycard]

I would believe the 1.423 figure.

 

[Peanut2013uk]

I would believe the 1.423 figure.

hmm.. it does drop to 1.335ish at times, I guess that don't help :S

have you used this asus rog intelligent processor 5? do you know how I can change it to 4.3ghz? or even 4.2ghz.

 

[scuzzycard]

I have a very similar motherboard, but I've never use auto-overclocking. There's too much risk of the motherboard choosing a voltage for my CPU that I wouldn't like. Never send a machine to do a human's job

 

[Peanut2013uk]

I have a very similar motherboard, but I've never use auto-overclocking. There's too much risk of the motherboard choosing a voltage for my CPU that I wouldn't like. Never send a machine to do a human's job

seems fine now, I changed 1 to manual and the other I fucked up and reset it and then reset my comp and now I get a voltage of 1.341v to 1.335v it must of been a bug or something