thin P4 3GHz cooler?

[m_a_d]

hi,

i'm looking for a very thin cooler for the P4 3GHz proc. it has to be as thin as possible, max is aprox 1.4 inch (35mm).
any ideas where to look? some vendor names or particular models?

i need to fit inside very thin case - about 1.7 inch (44mm), any advice appreciated.

[edit]
this is for the socket 775

 

[Grimmy]

Masscool

Cheap and loud.

35mm in height makes it kinda hard to look for one to fit.

That one should stand around 25mm.

 

[m_a_d]

i need to fit in 35mm with fan AND the heatsink... this masscool is 25 for fan and another 35 for heatsink, which makes it 60mm tall. so it's no use.

 

[m_a_d]

someone has just shown me this: http://www.thermaltake.com/2005/coolers/itbu/cl-p0187/cl-p0187.htm
looks promising - anyone here using it?

 

[Grimmy]

i need to fit in 35mm with fan AND the heatsink... this masscool is 25 for fan and another 35 for heatsink, which makes it 60mm tall. so it's no use.

Doh... got measurement messed up. Sorryl 😳

Gawd thats a tight fit.

 

[Grimmy]

Nice find Wusy. 😀

 

[m_a_d]

*Direct or indirect airflow onto this heat-sink is mandatory

hmmm... sounds risky because they do not say what kind of airflow this thing requiers. anyway thanks, this one looks promising too http://www.spirecoolers.com/main/product_cpu_detail.asp?ProdID=283

 

[1Tanker]

hi,

i'm looking for a very thin cooler for the P4 3GHz proc. it has to be as thin as possible, max is aprox 1.4 inch (35mm).
any ideas where to look? some vendor names or particular models?

i need to fit inside very thin case - about 1.7 inch (44mm), any advice appreciated.

[edit]
this is for the socket 775

Here's a Vantec 1U cooler...26.5mm thick. That'll give you room for a 15mm fan....

CCK-IP27:
http://www.vantecusa.com/product-cooling.html

This one isn't bad:
http://www.delta.com.tw/product/cp/dcfans/download/pdf/AFB/AFB92x92x15mm.pdf