This Radeon 9600pro not worth the aggrivation

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Well this 9600pro sure not working like everyone told me it would, I've
tried the drivers that came with it, I've tried the 4.3 drivers/control
pannel and even the lastest 4.5 drivers. Have had this card for about 2
weeks, and still goes nuts on me, it plays games great, but when I try to do
other things on the net like down load a file it looses everything and goes
garbled. Even the support that wants a report don't work . I've tried
differant setting as well only thing now is that my MB just don't like it.
Here is the properties for system:
Graphics Chipset (ASIC) RADEON 9600 SERIES
Decice ID 4150
Vendor ID 1002
Subsystem Vendor ID 18bc

Bus Type AGP 1X,AGP 2X, AGP 4X
Current Bus Setting AGP 4X

BIOS Version 008.015
BIOS Date 2004/01/16

Memory Size 256MB
Memory Type DDR SGRAM/SDRAM

Primary Display Yes

Driver File
C:\WINDOWS\System32\ati2dva...
2D Version 6.14.10.6430
Display Driver Version 7.991-040224m-013831C-ATI
Control Panel Version 6.14.10.6430

I have checked the DirectX controls and everything is suppose to work good.
I'm at my wits ends here, for I have tried and tried but still no luck has
Anyone have some solutions here..

 

[JohnS]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Sounds like you still have remnants of the 4.3 drivers
hanging around. You really have to flush those old
drivers, and that is not easy. I had the same headaches
with 4.3, and the problems persisted with 4.5 until I
went back and totally removed any sign of the old
drivers using the ATI uninstall program, and RegClean.
Plus, I just browsed for left over stuff and deleted it.
Once I did that, and reinstalled the 4.5 drivers, my
system cleaned up and runs without problems. There
is a site that says you also should remove other ATI
programs as well, and they describe why. I did not
do that, but I think the ATI removal tool did that
anyway.

johns

 

[boe]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Did you turn of VPU recover, fast write? Those two solved all of my issues.
And definitely make sure you are using the 4.6 drivers.
OH and VERY IMPORTANT - make sure you have the latest bios on your
MOTHERBOARD!

"Lightnen" <lightnenNo@mnsi.net> wrote in message
news:cb9e52021ep@enews4.newsguy.com...
> Well this 9600pro sure not working like everyone told me it would, I've
> tried the drivers that came with it, I've tried the 4.3 drivers/control
> pannel and even the lastest 4.5 drivers. Have had this card for about 2
> weeks, and still goes nuts on me, it plays games great, but when I try to
do
> other things on the net like down load a file it looses everything and
goes
> garbled. Even the support that wants a report don't work . I've tried
> differant setting as well only thing now is that my MB just don't like it.
> Here is the properties for system:
> Graphics Chipset (ASIC) RADEON 9600 SERIES
> Decice ID 4150
> Vendor ID 1002
> Subsystem Vendor ID 18bc
>
> Bus Type AGP 1X,AGP 2X, AGP 4X
> Current Bus Setting AGP 4X
>
> BIOS Version 008.015
> BIOS Date 2004/01/16
>
> Memory Size 256MB
> Memory Type DDR SGRAM/SDRAM
>
> Primary Display Yes
>
> Driver File
> C:\WINDOWS\System32\ati2dva...
> 2D Version 6.14.10.6430
> Display Driver Version 7.991-040224m-013831C-ATI
> Control Panel Version 6.14.10.6430
>
> I have checked the DirectX controls and everything is suppose to work
good.
> I'm at my wits ends here, for I have tried and tried but still no luck has
> Anyone have some solutions here..
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Well I tried the 4.6 drivers as well, ;the newest they were posted on Ati's
sight.. as fare as lates bio for MB will have to check into that one..

"boe" <boe_d@hotmail.com> wrote in message
news:ewXBc.88880$eu.34135@attbi_s02...
> Did you turn of VPU recover, fast write? Those two solved all of my
issues.
> And definitely make sure you are using the 4.6 drivers.
> OH and VERY IMPORTANT - make sure you have the latest bios on your
> MOTHERBOARD!
>
> "Lightnen" <lightnenNo@mnsi.net> wrote in message
> news:cb9e52021ep@enews4.newsguy.com...
> > Well this 9600pro sure not working like everyone told me it would, I've
> > tried the drivers that came with it, I've tried the 4.3 drivers/control
> > pannel and even the lastest 4.5 drivers. Have had this card for about 2
> > weeks, and still goes nuts on me, it plays games great, but when I try
to
> do
> > other things on the net like down load a file it looses everything and
> goes
> > garbled. Even the support that wants a report don't work . I've tried
> > differant setting as well only thing now is that my MB just don't like
it.
> > Here is the properties for system:
> > Graphics Chipset (ASIC) RADEON 9600 SERIES
> > Decice ID 4150
> > Vendor ID 1002
> > Subsystem Vendor ID 18bc
> >
> > Bus Type AGP 1X,AGP 2X, AGP 4X
> > Current Bus Setting AGP 4X
> >
> > BIOS Version 008.015
> > BIOS Date 2004/01/16
> >
> > Memory Size 256MB
> > Memory Type DDR SGRAM/SDRAM
> >
> > Primary Display Yes
> >
> > Driver File
> > C:\WINDOWS\System32\ati2dva...
> > 2D Version 6.14.10.6430
> > Display Driver Version 7.991-040224m-013831C-ATI
> > Control Panel Version 6.14.10.6430
> >
> > I have checked the DirectX controls and everything is suppose to work
> good.
> > I'm at my wits ends here, for I have tried and tried but still no luck
has
> > Anyone have some solutions here..
> >
> >
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Thats what must have been happening, did like you said. Used the
Cat.uninstaller then run Nortons Utilies to clean out unregistered files
then run Clean disk.. Rebooted and installed 4.6 everything seems to be
working but thats what I thought a few days ago..
Thanks there J. and S.B..

Lightnen
"johns" <johnsxxx@mudbog.edu> wrote in message
news:cb9lnb$8le$1@kestrel.csrv.uidaho.edu...
> Sounds like you still have remnants of the 4.3 drivers
> hanging around. You really have to flush those old
> drivers, and that is not easy. I had the same headaches
> with 4.3, and the problems persisted with 4.5 until I
> went back and totally removed any sign of the old
> drivers using the ATI uninstall program, and RegClean.
> Plus, I just browsed for left over stuff and deleted it.
> Once I did that, and reinstalled the 4.5 drivers, my
> system cleaned up and runs without problems. There
> is a site that says you also should remove other ATI
> programs as well, and they describe why. I did not
> do that, but I think the ATI removal tool did that
> anyway.
>
> johns
>
>

 

[Bob]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Did you install the chipsets .inf utility?


"Lightnen" <lightnenNo@mnsi.net> wrote in message
news:cb9p4j010t4@enews1.newsguy.com...
> Well I tried the 4.6 drivers as well, ;the newest they were posted on
> Ati's
> sight.. as fare as lates bio for MB will have to check into that one..
>
> "boe" <boe_d@hotmail.com> wrote in message
> news:ewXBc.88880$eu.34135@attbi_s02...
>> Did you turn of VPU recover, fast write? Those two solved all of my
> issues.
>> And definitely make sure you are using the 4.6 drivers.
>> OH and VERY IMPORTANT - make sure you have the latest bios on your
>> MOTHERBOARD!
>>
>> "Lightnen" <lightnenNo@mnsi.net> wrote in message
>> news:cb9e52021ep@enews4.newsguy.com...
>> > Well this 9600pro sure not working like everyone told me it would, I've
>> > tried the drivers that came with it, I've tried the 4.3 drivers/control
>> > pannel and even the lastest 4.5 drivers. Have had this card for about 2
>> > weeks, and still goes nuts on me, it plays games great, but when I try
> to
>> do
>> > other things on the net like down load a file it looses everything and
>> goes
>> > garbled. Even the support that wants a report don't work . I've tried
>> > differant setting as well only thing now is that my MB just don't like
> it.
>> > Here is the properties for system:
>> > Graphics Chipset (ASIC) RADEON 9600 SERIES
>> > Decice ID 4150
>> > Vendor ID 1002
>> > Subsystem Vendor ID 18bc
>> >
>> > Bus Type AGP 1X,AGP 2X, AGP 4X
>> > Current Bus Setting AGP 4X
>> >
>> > BIOS Version 008.015
>> > BIOS Date 2004/01/16
>> >
>> > Memory Size 256MB
>> > Memory Type DDR SGRAM/SDRAM
>> >
>> > Primary Display Yes
>> >
>> > Driver File
>> > C:\WINDOWS\System32\ati2dva...
>> > 2D Version 6.14.10.6430
>> > Display Driver Version
>> > 7.991-040224m-013831C-ATI
>> > Control Panel Version 6.14.10.6430
>> >
>> > I have checked the DirectX controls and everything is suppose to work
>> good.
>> > I'm at my wits ends here, for I have tried and tried but still no luck
> has
>> > Anyone have some solutions here..
>> >
>> >
>>
>>
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

theres also a chance that your mobo AGP drivers have been corrupted. try reinstalling them (for
some reason, messign about with lots of catalyst driver changes in a row seems to knock them out on
my machine, might be the case with yours as well.

S


johns wrote:
> Sounds like you still have remnants of the 4.3 drivers
> hanging around.

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Well I reinstalled them as well, did that before but might have forgotten
this last Six times.. lol
But this time I remembered so fore so good. Have done a few file
movements that screwed up things last few times but it seems to be holding
stable..

Lightnen

"Sham B" <shamb@easynet.co.ukNOSP> wrote in message
news:40d8ad4d$0$26239$afc38c87@auth.uk.news.easynet.net...
> theres also a chance that your mobo AGP drivers have been corrupted. try
reinstalling them (for
> some reason, messign about with lots of catalyst driver changes in a row
seems to knock them out on
> my machine, might be the case with yours as well.
>
> S
>
>
> johns wrote:
> > Sounds like you still have remnants of the 4.3 drivers
> > hanging around.
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Hay Bob.:
Hmmmmmmm that I'm not sure of, checked all the Sis systems and tried
to update all I could find. But I THINK I installed the chipsets inf utiliy
but can't remember.. Is there anyway to check. Systems seem to be better now
but it does hang every now and then but its sure better than it was.


"Bob" <bawb@sbcglobal.net> wrote in message
news:hI1Cc.3585$4r5.2143@newssvr25.news.prodigy.com...
> Did you install the chipsets .inf utility?
>
>
> "Lightnen" <lightnenNo@mnsi.net> wrote in message
> news:cb9p4j010t4@enews1.newsguy.com...
> > Well I tried the 4.6 drivers as well, ;the newest they were posted on
> > Ati's
> > sight.. as fare as lates bio for MB will have to check into that one..
> >
> > "boe" <boe_d@hotmail.com> wrote in message
> > news:ewXBc.88880$eu.34135@attbi_s02...
> >> Did you turn of VPU recover, fast write? Those two solved all of my
> > issues.
> >> And definitely make sure you are using the 4.6 drivers.
> >> OH and VERY IMPORTANT - make sure you have the latest bios on your
> >> MOTHERBOARD!
> >>
> >> "Lightnen" <lightnenNo@mnsi.net> wrote in message
> >> news:cb9e52021ep@enews4.newsguy.com...
> >> > Well this 9600pro sure not working like everyone told me it would,
I've
> >> > tried the drivers that came with it, I've tried the 4.3
drivers/control
> >> > pannel and even the lastest 4.5 drivers. Have had this card for about
2
> >> > weeks, and still goes nuts on me, it plays games great, but when I
try
> > to
> >> do
> >> > other things on the net like down load a file it looses everything
and
> >> goes
> >> > garbled. Even the support that wants a report don't work . I've tried
> >> > differant setting as well only thing now is that my MB just don't
like
> > it.
> >> > Here is the properties for system:
> >> > Graphics Chipset (ASIC) RADEON 9600 SERIES
> >> > Decice ID 4150
> >> > Vendor ID 1002
> >> > Subsystem Vendor ID 18bc
> >> >
> >> > Bus Type AGP 1X,AGP 2X, AGP 4X
> >> > Current Bus Setting AGP 4X
> >> >
> >> > BIOS Version 008.015
> >> > BIOS Date 2004/01/16
> >> >
> >> > Memory Size 256MB
> >> > Memory Type DDR SGRAM/SDRAM
> >> >
> >> > Primary Display Yes
> >> >
> >> > Driver File
> >> > C:\WINDOWS\System32\ati2dva...
> >> > 2D Version 6.14.10.6430
> >> > Display Driver Version
> >> > 7.991-040224m-013831C-ATI
> >> > Control Panel Version 6.14.10.6430
> >> >
> >> > I have checked the DirectX controls and everything is suppose to work
> >> good.
> >> > I'm at my wits ends here, for I have tried and tried but still no
luck
> > has
> >> > Anyone have some solutions here..
> >> >
> >> >
> >>
> >>
> >
> >
>
>