Thoughts on my PC build

[bluemagma]

http://pcpartpicker.com/p/L78RWZ Thoughts on my build

 

[Tolik_]

Nicely done

 

[bignastyid]

PSu isn't good(poor capacitors), cpu cooler is overpriced. I'd swap the cooler to a Cryorig H7 or H5, and swap out the Tier 3 Corsair RM for the superior tier 1 Evga G2.
http://pcpartpicker.com/part/cryorig-cpu-cooler-h7
http://pcpartpicker.com/part/cryorig-cpu-cooler-h5universal
http://pcpartpicker.com/part/evga-power-supply-220g20750xr

 

[bluemagma]

http://pcpartpicker.com/p/L78RWZ Thoughts on my build

The Corsair Vengeance Pro 16GB (2 x 8GB) DDR3-2400 Memory operating voltage of 1.65V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.

What's that mean 0.0

 

[bignastyid]

Intel recommends ram that runs at 1.5v, and the stuff you have runs at 1.65v. It will still work fine just load the xmp profile.

 

[bluemagma]

Intel recommends ram that runs at 1.5v, and the stuff you have runs at 1.65v. It will still work fine just load the xmp profile.

How do I load the "Xmp" profile and what is that *_*