I've just finished returning my Titan X (pascal) water cooled block back to stock air cooler. When I boot into the BIOS/EFI the fan isn't rotating in the Titan X (pascal) ... can anyone confirm if this is "normal" or a problem when in the BIOS/EFI?
I'm certain I reconnected the fan wire to the PCB but perhaps the wires got trapped when securing the two halves.
The GPU does display and doesn't get hot (according to my external thermal probe I placed).
If anyone can report back, much appreciated, save me time pulling the GPU apart again to check that fan wire.
Cheers, Rob.
I'm certain I reconnected the fan wire to the PCB but perhaps the wires got trapped when securing the two halves.
The GPU does display and doesn't get hot (according to my external thermal probe I placed).
If anyone can report back, much appreciated, save me time pulling the GPU apart again to check that fan wire.
Cheers, Rob.