Topic: MSI Z170 Gaming M5 Debug codes 19 55 4C 00 0d

[iamthedarkwolf]

i5 6600k
Corsair h115i water cooler
G.Skill Trident Z 16GB (8x2) DDR4 3200 PC4-25600
HyperX Savage 240GB SSD
MSI Z170 Gaming M5 Mobo
Rosewill Quark 850W 80+ platinum
DBPOWER Keyboard
UsmartTech Venus MMO mouse.
Gateway Monitor.



I have the MSI Z170 Gaming M5 and i am getting these Debug codes 19 55 4C 00 0d. This is my very first build and I do not see any explanation in the manual. But I am guessing it might be a RAM issue. All the lads and fans come up on the board but nothing comes on the screen I am using DVI cable from the mobo to the monitor. Is there a reason I am not getting signal to the monitor.

 

[qazzi]

from MSI forums https://forum-en.msi.com/index.php?topic=264261.0

 

[iamthedarkwolf]

Tried resetting the CMOS no dice.

 

[qazzi]

with only one stick of memory??

 

[qazzi]

also could you give the model number of your memory?? example "F4-2400C15Q-32GNT" something like that.

 

[iamthedarkwolf]

F4-3200C14D-16GTZ

Yes I tried with one stick still getting same codes. And still no signal to the Monitor I am using the Mobo DVI-D to the DVI port on the monitor.

Also I took out the cpu all the pins looked fine on cpu and mobo.

 

[qazzi]

well i checked your memory it is not in the compatibility list in MSI website you can check it yourself. link https://www.msi.com/Motherboard/support/Z170A-GAMING-M5.html#support-mem

 

[iamthedarkwolf]

ok would that also cause nothing to come up on my monitor?

 

[iamthedarkwolf]

Yea I don't see it on the list on the MSI list but on G.Skill website is says it is. Which why I bout it. http://www.gskill.com/en/product/f4-3200c14d-16gtz
Guess G.Skill let me down lol.

SO do you think if I sent back the RAM and got a model on the list it would Post then and I could do my initial setup?

 

[qazzi]

yes. most of the time those list in g. skill list has different bios version to get them to work. but i would follow what is on the motherboard compatibility list for more accuracy.

and yes also to your question on nothing coming up on the monitor.

 

[iamthedarkwolf]

So if I send back the ram and get the right model I should be ok?

 

[qazzi]

So if I send back the ram and get the right model I should be ok?

yes. it should

 

[iamthedarkwolf]

Replaced the 3200 mhz ram with th 3000mhz ram from the compatibility list fixxed the issue.