[SOLVED] Toshiba DT01ACA100 not working/recognized

[Kalikanto]

Hi everybody, I finished building my PC, I habe 3 SATA devices (1 SSD and 2 equal HDD), also onedie M.2
-One HDD is not working, its not recognized in BIOS.
-Motherboard Asus Prime Z 390-A
-Everything is plugged in well, i tried to connect the HDD in different SATA slots and nothing
-Nothing in Disk Manager in Windows

Is there anything to so in the BIOS? When I go to the slot list in Bios it doesnt recognize anything in solt 5, where the HDD is connected.
Is maybe the HDD dead broken? How could find out/prove that?
I just need to know if there is any solution or if the drive is broken.

-When computer is turned on, HDD is like off, doesnt vibrate like the other HDD, is this info helpful.
Pls help!😀👍
Thank you all

 

[fzabkar]

Did you do this?

Warning: do not interchange modular PSU cables:
http://www.hddoracle.com/viewtopic.php?f=56&t=2545

If so, then see …

TVS Diode FAQ:
http://www.hddoracle.com/viewtopic.php?f=100&t=86

 

[Kalikanto]

I think I connected one SATA power cable from my old PSU, is now my HDD completely dead pr is there anything to do?

 

[fzabkar]

See my FAQ.

Upload a photo of your PCB.

 

[Kalikanto]

Yes I read it, tomorrow I will have time, so I will take the HDD out and check if I find the diode and take a photo.

 

[Kalikanto]

https://imgur.com/6Quemhm

View: https://imgur.com/6Quemhm


Thats the PCB, I dont know which is the Diode, I cant even test it. If you or someone knows it. Its Toshiba DT01ACA100. PCB: HF220 0A90381 01

 

[Kalikanto]

https://imgur.com/4isBBny

View: https://imgur.com/4isBBny

This is better

 

[popatim]

top right, check the one that says Z4 on it and the big one to it's left. Also Check that little one that says L0, it may be an inductor being used as a fuse.