[SOLVED] Toshiba satellite Pro C50-A-1KJ CPU LCD isn't working but can access bios on external monitor

[Georgec06]

Hi I have a Toshiba satellite Pro C50-A-1KJ and I recently replaced the CPU to fix my old one as it had defects and the intel graphics weren't working now it turns on and I can access the bios but only using a second monitor nothing comes up on the main LCD How do I fix this?

 

[ex_bubblehead]

Obviously you didn't get everything connected properly. Open it back up and make sure that every single plug and cable are plugged in tightly, and in the correct position. Then test before closing it again. You may also have installed an incompatible CPU.

 

[Georgec06]

Obviously you didn't get everything connected properly. Open it back up and make sure that every single plug and cable are plugged in tightly, and in the correct position. Then test before closing it again. You may also have installed an incompatible CPU.

I'll have a look but I brought an intel core i5 4200m to replace the i5 4200m that was already in there so I wouldn't think it's incompatible that's the stock CPU