Toshiba vista satellite A135-S2276

Status
Not open for further replies.

treventappe

Prominent
Jan 23, 2018
1
0
510
My Toshiba windows vista satellite A135 won't run I turn it on and all I get is a black screen I have tried to restart and press F12,F11 and the "Zero" key and have had no luck it was given to me wiped and now it won't run what so ever no cursor or Microsoft emblem
 
Solution
OK is it the device that won't turn on (no lights or sounds) or is it the display that just isn't turning on? If it is no signs of life, try the first option below. If it is just the display, then try the second option.

Option 1...

NOTE: Yes, I know some batteries are not so easy to get to, on some devices. However, it should be removable/replaceable. Unless it is under warranty, then you should contact the manufacturer first.


Try the following and see if it will turn on...

1. Unplug your charger cord.
2. Remove the battery.
3. Press and hold the "Power" button for 30 seconds.
4. Now plug back in the power/charger cord.
5. Now put the battery back in.

If this doesn't help, then test the power cord to see if it is good. Either try...
OK is it the device that won't turn on (no lights or sounds) or is it the display that just isn't turning on? If it is no signs of life, try the first option below. If it is just the display, then try the second option.

Option 1...

NOTE: Yes, I know some batteries are not so easy to get to, on some devices. However, it should be removable/replaceable. Unless it is under warranty, then you should contact the manufacturer first.


Try the following and see if it will turn on...

1. Unplug your charger cord.
2. Remove the battery.
3. Press and hold the "Power" button for 30 seconds.
4. Now plug back in the power/charger cord.
5. Now put the battery back in.

If this doesn't help, then test the power cord to see if it is good. Either try your cord in another device, or try another devices cord in your laptop. You may also want to try charging it when the device is off, rather than on. If it works then, the cord is probably the issue.

Should that not be the problem, then check the battery to see if it needs replacing.

Option 2...

Try this...

1. Turn the laptop off (not sleep or hibernate but off).
2. Connect an external monitor to the laptop.
3. Turn on the external monitor.
4. Turn on the laptop.

NOTE: You may have to press an "external monitor" button. Could be the f4 button or a button with two monitors on it, for the external monitor to work.

If you can see fine on the external monitor, then your attached display, or the ribbon cable that connects it, are your problem.

If you can't see on the external monitor at all, or the problem occurs on the external monitor as well, then it is probably the graphics card/GPU that is the problem, which may require the motherboard be replaced.
 
Solution
Status
Not open for further replies.