TP LINK ADSL2+ modem router as ethernet WAN

[anujtripathi04]

So the case is like I was using this TP LINK TD-W8951ND V5 wireless N ADSL2+ Modem router that takes RJ11 input and I configure it to dial a PPPoE/PPPoA connection over adsl.
Now I want to use it with an ethernet input and dial a PPPoE from inside the modem and use it with laptop/ phone wifi.

What I tried:

* I simply tried giving the username and password inside the modem and put RJ45 into the LAN4 as input, but it failed to connect.

*When I connect the source RJ45 into the any of the LAN of modem and dial the PPoE from my PC it gets connected and I can browse. But the problem here is I can't share the internet over modem's wifi.

* I tried the step 1 with DHCP and NAT disabled but no luck!

Any help appreciated 🙂
Thanks 🙂

 

[jsmithepa]

You are using disparate technical terms that doesn't explain what you are trying to do, hence I don't understand the problem.

In english, what are you trying to accomplish? Post a pix if you feel like.

 

[shekharburnwal]

IF YOU HAVE A ETHERNET CABLE AS AN INPUT THEN YOU CAN PLUG IN TO THE LAN/WAN PORT OF YOUR TP LINK MODEM ROUTER...AND TURN ON THEM MODEM ROUTER AND WIFI ON IT

THEN

FIRST OF ALL NOTE DOWN THE IPV4 CONFIGURATION FROM CONTROL PANEL>NETWORK SHARING CENTER>CHANGE ADAPTER SETTINGS(ON THE TOP LEFT HAND SIDE OF NETWORK SHARING CENTER )>ETHERNET PROPERTIES(RIGHT CLICK ON ETHERNET ICON CLICK ON PROPERTIES)>INTERNET PROTOCOL VERSION 4 (TCP/ IPV4) CLICK ON PROPERTIES

NOW NOTEDOWN ALL THE CONFIGURATION WHICH IS MENTIONED OUT THERE AND THEN CLICK ON OBTAIN IP ADDRESS AUTOMATICALLY AND CLICK ON OK..THEN

THEN TURN ON THE WIFI ON YOUR LAPTOP OR PHONE

IF YOU ARE USING A LAPTOP THEN CONNECT THE WIFI FIRST (IF YOU ARE HAVING PROBLEMS TO FIND OUT THE PASSWORD OF WIFI THEN LOOK AT THE BACK SIDE OF YOUR MODEM ROUTER YOU WILL GET IT THERE.)

THEN AGAIN GO TO CONTROL PANEL>NETWORK SHARING CENTER>CHANGE ADAPTER SETTINGS(ON THE TOP LEFT HAND SIDE OF NETWORK SHARING CENTER )>WIFI OR WIRELESS(RIGHT CLICK ON WIFI OR WIRELESS ICON CLICK ON PROPERTIES)>INTERNET PROTOCOL VERSION 4 (TCP/ IPV4) CLICK ON PROPERTIES THEN TYPE ALL THE CONFIGURATION WHICH YOU NOTE DOWN BEFORE.. AND CLICK ON OK...

THEN OPEN YOUR BROWSER (I.E. INTERNET EXPLORER , FIREFOX OR GOOGLE CHROME ...ANY ONE OF THEM)

THEN OPEN YOUR LOCAL INTERNET LOGIN PAGE IF IT REQUIRES TO ACCESS THE INTERNET WHEN YOU USE TO CONNECT THE COMPUTER THROUGH ETHERNET( FOR E.G. 192.168.1.200/KOLKATA15/WISHN/LOGIN.JSP)

NOW YOUR LAPTOP IS SUCCESSFULLY CONNECTED TO WIFI THANK YOU.

AND IF YOU WANT TO CONNECT THE MOBILE PHONE ANDROID GOT TO WIFI SETTINGS THERE YOU WILL FIND YOUR MODEM ROUTER NAME CLICK ON THAT THEN TYPE YOUR WIFI PASSWORD WHICH IS AT THE BACK SIDE OF YOUR MODEM THEN CLICK ON ADVANCED SETTINGS IP STATIC THEN TYPE DOWN ALL THE COFIGURATION WHICH YOU NOTE DOWN EARLIER THEN CLICK ON CONNECT NOW ITS WILL GET CONNECTED WITH INTERNET ACCESS...