Troubblleee need help D:

[akarainer]

Hello.
So basically.... i bought a new comp and i tried putting..
http://www.bit-tech.net/hardware/2007/06/21/kingston_hyperx_khx9600d2k2_2g/1

and

http://www.newegg.com/Product/Product.aspx?Item=N82E16820104008&nm_mc=OTC-17exta6&cm_mmc=OTC-17exta6-_-Memory+(Desktop+Memory)-_-Kingston+HyperX-_-20104008

one's 1066MHz and other is 1200MHz..

on the mobo it says it supports 800MHz... and OC to 1200.

Mobo: http://www.newegg.com/Product/Product.aspx?Item=N82E16813188013
Whenever i put the memories (all 4) into the slots and start the comp. It would have the blue screen right before window starts up.

However whenever I take the the pair of 1200 or 1066 out, and leave the other pair in and start the computer. It Runs fine. so... i know it has something to do with the different speeds of the memory. Also one is 2.2V and the other is 2.3-2.35V.

I haven't done anything in tbe BIOS. other than update it.
I don't really know how to OC and do the changes in the voltage.. so..

If anyone can help me. It'll be greatly appreciated!

 

[ibp_john]

Looks like it doesn't detect the proper speeds for the memory.

You need to go into the bios and set the timings manually. I'm not familiar with the 680i bios layout but you'll probably need to go into the advance features, select fsb & memory config. You might need to unlink it and manually set the memory speed to 1066. Also you need to select memory timings and set them to 5-5-5-15 and that should do it.