Tryin to build a gigabyte GA-G1975X

cfour9611

Distinguished
Feb 10, 2007
1
0
18,510
I am tryin to get this rig to go but I can't get any video to show,now this is after I checked my pci-e card in another board and it worked fine the only thing that is dif is that this mobo says that it is sata3.0 ready I have a raptor that is 1.5 that I run my O.S onother than the ram being new and not having nothing to test it in since this is my first mobo with ddr2. I just got back from iraq and was so so ready to hammer on this new dual core ddr2 crossfire ready monster and it looks like I went to a xathouse and can't do nothin.the mobois a gigabyte GA-G1975X my vid card is an X800 GTO(yaa crossfire ready w/o a card that is)case is the MSI Viper w/the 500 watt free p/s cpu is the intel 930D cooler is a zalman cnps7000 b for now till I venture out into the water.well anyone that can help I need it badly and it will be very appreciated.............
 

bcool

Distinguished
Feb 7, 2007
4
0
18,510
I wish I could help and will watch this one to see what your problem turned out to be. I set up a GA-G1975X January last year. No problems then. Single card setup = Nvidia GeForce 7800GT plugged into primary 16xPCIe slot + 6-pin PCIe pwr cable hooked card to p/s = wham bam - beautiful video!
Intel P4 650 3.4Ghz
Thermaltake w7003 Modular 520w P/S ATX12v 2.0
2 x WD Sata2 raid mode/no raid defined

sorry you got troubles. good luck!