[SOLVED] Trying to OC my RAM to 3000 MhHz

[Baconslap9795]

Here are my specs, https://valid.x86.fr/cvwstk .
I have been playing Escape from Tarkov recently, I OC my CPU to 3.6 MHz, then OC my RAM to 3000 MHz while changing the Voltage to 1.375. I haven't fiddled with the timing just yet, but when I do this Tarkov crashes within 30 min of playing. I have no idea why. No blue screen of death or anything, just crashes and this repeats. Any idea on how to solve this when i change the RAM Freq to 2666 mhz or whatever it is, it works fine but i can see the difference between the freq. When i have my RAM OC at 3000. I get a constant 60 fps in rain, drizzle, crowded areas. But when at 2666 mhz its 45 fps when raining and 30-50 fps when scoped into a sight.

 

[bmockeg]

What’s the link the exact RAM you bought. It’s saying 2133mhz in your link. Not all RAM will overclock stable, ESPECIALLY with a 1st gen Ryzen. The RAM could state it runs at 3000 MHz and still may not work. Knowing your exact RAM is crucial to the answer.

 

[Baconslap9795]

Here's the RAM https://www.bestbuy.com/site/corsai...0QzPXnWM8c_IhXyfNExoC_rcQAvD_BwE&gclsrc=aw.ds

 

[bmockeg]

I’d bump the voltage for RAM up. Up to 1.45 daily use won’t hurt. Try that and see. Again even though the RAM says 3000, your board says up to 3200. 1st gen ryzen are garbage with RAM compatibility.

 

[DMAN999]

I would try setting the XMP profile in the BIOS But then change the Memory frequency to 2933 then run Memtest86.
And just FYI that RAM kit is not on your MB's QVL for your CPU:
https://www.asrock.com/MB/AMD/Fatal1ty AB350 Gaming K4/index.asp#Memory
And I would also suggest you read this Guide:
https://forums.tomshardware.com/faq...y-ram-and-xmp-profile-configurations.3398926/