Turning on newbuild for first time tripped fuse box now it wont boot at all..

[Gary Lowe]

So yeah, I finished building my computer today and went to turn it on for the first and it cut all the power in my house. So I unplugged it fliipped the switch back and now it wont turn on at all...

Ive tried different circuits, check all the cables where connected properly, made sure my surge protector was working...

Is the fuse in the PSU power cable blown, or is my PSU knackered completely?

 

[iamcacao]

What PSU do you have?

 

[Gary Lowe]

What PSU do you have?

XFX CoreEdition 750watt

 

[smorizio]

From your post are you in th uk??? If so look at the back of the power supply. Some power supply's have us and over seas red switch on them. The old 120 v or 220v switch. If yours had that switch it may have been in the 120 position. If no switch there check online to see if the power supply is one that auto switches to the correct input voltage and is there was anything you needed to do to switch it to higher voltage then 120v.