Two loops one reservoir

[I Am Zac]

I have an Xspc photon 270 d5 pump res now, it has two inlets one outlet, if I put a y splitter at the outlet could I use it at two separate loops? And if so will a single d5 vario pump be enough for it
Current
Reservoir
390x block
420mm rad
Motherboard vrm
Cpu
Northbridge
360rad
Reservoir

If it was two loops it would be
Res
Northbridge
120mm rad
Cpu 8350 @5ghz
Vrm
420mm rad

2nd loop
Res
120rad
390x water block
390x waterblock (I plan on crossfire near future)
360 rad
Res

 

[Lutfij]

When you say two separate loops you should have two res'. Having the loop split at the outlet and where the pump is while the inlets meet at the res means that you're trying to accomplish a parallel loop. You could do what you're intending to do though you'd be better off to have the loop serially but have it run parallel at the GPU area until it exits and meets at the res either in serial form or parallel form.

One pump would do but if you have too many restrictive parts, i.e multiple GPU's in 3 or way SLI then you're required to go for a secondary pump, a parallel loop or a secondary loop to isolate the flow and thermal dissipation.