Two of the ram ports cause reboot loop

[Sanchezerino]

Hey! I recently build a watercooling system which was succesfull, but when i inserted the 4 ram sticks and started the computer it turned of in a matter of seconds. After testing all such of things i found out that port 3 & 4 caused this problem. While port 1 & 2 worked perfectly fine. So i can only use two sticks.

some specs:
i7
z97 gaming 5 msi
980 strix
rm850

 

[Sanchezerino]

many boards will tell you which ram slots to use first... this is one point,
but without having more details we cannot help... which i7, which board, which ram...

but you can also try to run memtest on every module, booting from a stick (how to see google)
to make sure none of the modules has a problem - if they are fine, come back with details ans specs

mobo: z97 gaming 5 msi
ram: corsair vengeance 2x4, each stick is 4gb
processor: i7 4750k

 

[Sanchezerino]

I have testet every stick, theyre totally fine. Its just the two spesific ram ports that makes the computer go into this reboot loop. Or atleast i think so. I have had the same mobo and ram sticks a couple of months now, and it has worked fine. Until i installed this watercooling system.

 

[Sanchezerino]

I really sure it doesnt have anything with the liquid. But i may have damaged the pcb in anyway, not that i now of anything i might have done. But i will look mor into it. Thanks