tyan s2466n4m console redirecting

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

If I enable console redirect on my Tyan S2466n4m,
what program would I use to intercept the output from the ethernet port
ont he remote computer? E.G. telnet.
Also, how would I configure the program to look for output
from the s2466n4m, which port to listen on, and
what ip address?

Many thanks

phil

--
------------------------------------
phil

remove nospam. from From or Replyto line

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

philwh@nospam.gate.net wrote:

: If I enable console redirect on my Tyan S2466n4m,
: what program would I use to intercept the output from the ethernet port
: ont he remote computer? E.G. telnet.
: Also, how would I configure the program to look for output
: from the s2466n4m, which port to listen on, and
: what ip address?

Unfortunately there is a misprint in the MB manual. The board can only
send the console to a serial port, so you need a serial cable and a
suitable terminal program. If use Linux minicom will do and if you use
Windows you can try TeraTerm.

Cheers,

Tomas Lindén
------------
Tomas-Linden-at-Helsinki-FI@No.Spams.To.FI

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

In article <cacq41$1en$1@oravannahka.helsinki.fi>,
Tomas Linden <Address@MySig.com> wrote:
>
>
>philwh@nospam.gate.net wrote:
>
>: If I enable console redirect on my Tyan S2466n4m,
>: what program would I use to intercept the output from the ethernet port
>: ont he remote computer? E.G. telnet.
>: Also, how would I configure the program to look for output
>: from the s2466n4m, which port to listen on, and
>: what ip address?
>
>Unfortunately there is a misprint in the MB manual. The board can only
>send the console to a serial port, so you need a serial cable and a
>suitable terminal program. If use Linux minicom will do and if you use
>Windows you can try TeraTerm.
>
>Cheers,
>
>Tomas Lindén
>------------
>Tomas-Linden-at-Helsinki-FI@No.Spams.To.FI


Thanks for the info. Now, if it redirects the output to a serial port,
which port, and how do I set the serial parameters, baud, handshake and the like.

Many Thanks.

phil

--
------------------------------------
phil

remove nospam. from From or Replyto line

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.tyan (More info?)

philwh@nospam.gate.net wrote:

: In article <cacq41$1en$1@oravannahka.helsinki.fi>,
: Tomas Linden <Address@MySig.com> wrote:
:>
:>
:>philwh@nospam.gate.net wrote:
:>
:>: If I enable console redirect on my Tyan S2466n4m,
:>: what program would I use to intercept the output from the ethernet port
:>: ont he remote computer? E.G. telnet.
:>: Also, how would I configure the program to look for output
:>: from the s2466n4m, which port to listen on, and
:>: what ip address?
:>
:>Unfortunately there is a misprint in the MB manual. The board can only
:>send the console to a serial port, so you need a serial cable and a
:>suitable terminal program. If use Linux minicom will do and if you use
:>Windows you can try TeraTerm.
:>
:>Cheers,
:>
:>Tomas Lindén
:>------------
:>Tomas-Linden-at-Helsinki-FI@No.Spams.To.FI


: Thanks for the info. Now, if it redirects the output to a serial port,
: which port, and how do I set the serial parameters, baud, handshake and the like.

There is a BIOS menu for setting all these parameters.

Tomas Lindén
------------
Tomas-Linden-at-Helsinki-FI@No.Spams.To.FI