Question Unable to boot Biostar TB360-BTC D+

Feb 24, 2021
2
0
10
0
Motherboard emits a fast constant beeping tone. Biostar support suggested that while it was designed for 8th and 9th gen Intel CPUs, a bios update was needed to use a 9th gen CPU. So I tried an 8th gen CPU. Same problem. Memory is properly seated and confirmed not defective. Power is adequate (750 watt PSU). Tried CMOS reset too. No joy. Biostar tech support slow, unreliable and terrible English. Regretting the purchase.
 
Apr 24, 2021
2
0
10
0
really... i bought 2 same board cuz i tough its board problem. I use I5 9400F , no integrated gpu. I did almost all troubleshooting method. Is there a fix? Change bios without using CPU or anything, pls help...
 
Mar 11, 2021
2
0
10
0
Will it be fixed if we update the bios to 127 without using CPU? I tried and i dont think it works, have anyone tried?
This board will only support a CPU with integrated graphics as it is required by the board to have initial detection through hdmi port by CPU.

Note: Also no difference by updating bios to 127
 
May 20, 2021
1
0
10
0
Hi
I'm Ale from Italy
I had the same problem:
TB360 Btc D+ ver.6
bios 127bss on board
cpu intel core i3-8100 integrated graphics sr3n5 3.6ghz x940c595

mainboard without graphics card emits 8 bips
mainboard with an rtx 3060 card emits 8 bips

i checked the ram and it's ok

what could be the problem?
cpu?
I've seen this: https://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=1009#cpusupport
1151Intel Core i3 Processor8100QNET3.60 GHz1100 MHzCoffee Lake65WB36CF127.BSS
 

ASK THE COMMUNITY