Question Unable to boot Biostar TB360-BTC D+

[beefcakehero]

Motherboard emits a fast constant beeping tone. Biostar support suggested that while it was designed for 8th and 9th gen Intel CPUs, a bios update was needed to use a 9th gen CPU. So I tried an 8th gen CPU. Same problem. Memory is properly seated and confirmed not defective. Power is adequate (750 watt PSU). Tried CMOS reset too. No joy. Biostar tech support slow, unreliable and terrible English. Regretting the purchase.

 

[istreamtofly]

I had this very same conflict. The TB360 BTC D+ requires a CPU with integrated graphics. I used Intel Core i3-9100 Desktop Processor 4 Cores up to 4.2 GHz LGA1151 300 Series 65W with a integrated graphics. BIOS was 112 and did not need to upgrade to 127 but did so later and still is working fine.

 

[Lee Shan Hau]

really... i bought 2 same board cuz i tough its board problem. I use I5 9400F , no integrated gpu. I did almost all troubleshooting method. Is there a fix? Change bios without using CPU or anything, pls help...

 

[Lee Shan Hau]

Will it be fixed if we update the bios to 127 without using CPU? I tried and i dont think it works, have anyone tried?

 

[istreamtofly]

Will it be fixed if we update the bios to 127 without using CPU? I tried and i dont think it works, have anyone tried?

This board will only support a CPU with integrated graphics as it is required by the board to have initial detection through hdmi port by CPU.

Note: Also no difference by updating bios to 127

 

[ale5577]

Hi
I'm Ale from Italy
I had the same problem:
TB360 Btc D+ ver.6
bios 127bss on board
cpu intel core i3-8100 integrated graphics sr3n5 3.6ghz x940c595

mainboard without graphics card emits 8 bips
mainboard with an rtx 3060 card emits 8 bips

i checked the ram and it's ok

what could be the problem?
cpu?
I've seen this: https://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=1009#cpusupport

1151

Intel Core i3 Processor

8100

QNET

3.60 GHz

1100 MHz

Coffee Lake

65W

B36CF127.BSS