Unable to install Noctua NH-D14 SE2011 on MSI X99S

[digvijit]

Hey guys i'm in bit of a problem here..currently assembling my first workstation with youtube's help but i'm stuck in the part where i'm supposed to mount the cooler(Noctua SE-2011) onto the motherboard(MSI X99S gaming 7). My case is Phanteks Enthoo Pro if that helps. In the initial stage the 4 long screws that are supposed to go all the way through the 4 holes from behind the motherboard/backplate aren't going through properly..meaning they only go through partly(just the ring part of the screw slides in leaving the rest out). Sorry if it doesn't make sense as i'm new to this. Let me know if you require any more information or clarification. Please help!

 

[alexoiu]

Hi, Not sure if backplate needed. Check https://www.youtube.com/watch?v=3Ewr7x3BXO0
and the installation guide.
http://www.noctua.at/pdf/manuals/noctua_nh_d14_se2011_manual_en.pdf

 

[Ironsounds]

Hello... Will this help you? http://thepcenthusiast.com/noctua-nh-d14-cpu-cooler-review/

Some parts are for AMD and Intel MB's installs... Typically the Hole pattern in the MB's will dictate which one to use.

Do you need to rotate a hex head screw into the back plate molded opening? to get more length... put a piece of masking tape on it to hold it in place.