Hi all, before posting this thread I have combed endlessly through the internet for a solution with no luck, so I am really hoping the you kind people out there can help me out. So here is my problem, I have a QSee security camera system and I am trying to set up port forwarding so that I can view my cameras remotely. I have done this before with another QSEE system, so I would like to think that I have some idea as to what I am doing (but I can be wrong). Right now my DVR is connected to my Linksys router via ethernet cable and the router is connected to the internet with a PoE switch. I can see my DVR system in my router's network map and I have reserved the DVR's ip (currently 192.168.1.129). My router's LAN ip is 192.168.1.1 and WAN is 192.168.2.. I have tired forwarding port 80-85 on my router to my DVR's ip. I also tried forwarding 8888 as external port to internal port 8. Used DMZ, UPnP... still no luck. Canyouseeme.org indicate port closed, with connection timeout message for port 80 and connection refused for any other port. One thing I do noticed, when I go to enable UPnP on my DVR, the external IP indicate my WAN ip 192.168.2.. Not sure if that has to do with anything. I also also mention that I have a Linksys EA7300. I really hope someone have some insight on how to go about this. Thanks in advance to all the people taking their time out to answer this thread.