Unable to reset bios even after cmos battery removal

[lgjmac]

Ryzen 7 1700
Radeon Rx580 Graphics
Card was being noisy. Thought would try turning it off. Assumed i had integrated graphics. Apparently not. Disabled this PCIE port in Bios. Afterwards screen went blank. Every time turned on now get 3 long beeps 3 short. Believe it is HP code for screwed up graphics card. Removed CMOS battery overnight. Did nothing. Could the port still be turned off? I also reset graphics card.

So to clarify please see comment below for spec. Not sure how to reply to my own post and posting from phone out of necesity. Hp are coming to collect tomorrow but this such an important week for me that if i can get it working and cancel them it would make a huge difference to me.

Leaving the machine running after the beeps and the grraphics card fan does start running but nothing else. Any ideas?

 

[The Paladin]

1. when you removed the cmos battery did you disc onnect the power cord from your computer?
normally you unplug power cord, then remove cmos battery and wait 2-3 mins

2. you told BIOS to not use the video card ? really ? there is such an option in the Ryzen bios (which contains no internal video card) ?
what make and model of motherboard are you using ?

 

[thx1138v2]

Sometimes there is also a jumper on the mobo that needs to be changed to drain the capacitors on the motherboard to reset the BIOS. Check your manual.

 

[lgjmac]

Guys thank you so much. Im stuck without my computer and i have so much stress on me that i really dont have time for it to go in for repair!

I have tried to look up the motherboard type but couldnt find it using my phone. I do know the spec and that it is an HP motherboard i believe made by them (they do make their own or at least someone else does and they rebrand it).

It is a hp omen 800-017na

Ryzen 7 1700 processor
Graphics radeon rx580
No integrated graphics
8gb ram
4 months old
256 gb ssd samsung
2tb sata
Has win 10 fresh download to avoid the bloatware (i have the recovery tools on usb and partition) on the ssd as boot drive
Also has ubuntu on the sata

In the bios the setting was under device configuration or something it didnt say graphics per se it had two options: m2 port and pxie port i switched off pcie because card making so much noise and i really need to work this week and assumed intefrated graphics too 🙁